for those with Series MM sidevalve cars produced between September 1948 and February 1953
4 posts • Page 1 of 1
I have the workshop manual AKD530A here. If its a UK spec car with an 'air silencer' fitted, then according to section B12 (page B16), it requires no maintenance. The export type oil-bath 'air cleaner' is identifiable by having a wing-nut holding it in place. The element can be removed, cleaned with paraffin (presumably petrol with usual safety precautions). Top up the oil on the shelf beneath the element. Use light grade oil (SAE20 quoted but SAE30 these days probably). There is a level indicator. Don't over-fill or you'll draw excess oil into the combustion chambers. If the air box is sludgy, clean the whole lot, not just the element.
1956 4-door called Max
Yup, the UK spec one was just there to reduce the 'sucking' noise of the intake. I binned mine since it wasn't really able to do much more than filter out spanners and screwdrivers. Might be possible to gut one and fit a K&N cone filter inside it. If you've ever opened up an export filetr....Y U K !
Who is online
Users browsing this forum: No registered users and 1 guest