Clock

for those with Series MM sidevalve cars produced between September 1948 and February 1953

Moderator: Moderators

palacebear
Minor Legend
Posts: 2876
Joined: Mon May 16, 2016 4:39 pm
MMOC Member: Yes

Clock

Postby palacebear » Sat Sep 01, 2018 12:28 pm

1956 4-door called Max

Sleeper
Minor Fan
Posts: 259
Joined: Tue Nov 08, 2016 3:18 pm
MMOC Member: No

Re: Clock

Postby Sleeper » Sat Sep 01, 2018 12:56 pm

..or for £2.75 from Ping Pong...
2017_1110carclock0001.JPG
2017_1110carclock0001.JPG (264.72 KiB) Viewed 255 times

https://www.ebay.co.uk/itm/Luxury-Milit ... 2749.l2649

John :wink:

palacebear
Minor Legend
Posts: 2876
Joined: Mon May 16, 2016 4:39 pm
MMOC Member: Yes

Re: Clock

Postby palacebear » Sat Sep 01, 2018 3:36 pm

...or more vintage....
20180901_153613.jpg
20180901_153613.jpg (3.11 MiB) Viewed 248 times
£20 off fleabay. Cracked lens but about 80% cheaper than the average price for one of these. Good timekeeper for a mechanical movement too. :D
1956 4-door called Max

les
Minor Maniac
Posts: 6906
Joined: Tue Feb 12, 2002 12:00 am
MMOC Member: No

Re: Clock

Postby les » Sat Sep 01, 2018 3:49 pm

Listing said---- was working when removed. I'd need to know if it still was, at that price!


palacebear
Minor Legend
Posts: 2876
Joined: Mon May 16, 2016 4:39 pm
MMOC Member: Yes

Re: Clock

Postby palacebear » Sat Sep 01, 2018 5:12 pm

My thoughts too. Actually fairly easy to repair as long as the mechanism isn't corroded. Just damn fiddly. I used to be able to fix Smiths/Jaeger 12volt clocks but my eyesight isn't up to it any more :(

Didn't forum contributor 'Boomlander' convert a non-runner to a quartz movement with AA battery last year...?
1956 4-door called Max

les
Minor Maniac
Posts: 6906
Joined: Tue Feb 12, 2002 12:00 am
MMOC Member: No

Re: Clock

Postby les » Sat Sep 01, 2018 6:54 pm

I've got a smiths. 2inch clock that doesn't work. Your last post suggests I might be able to reclaim it. :D


palacebear
Minor Legend
Posts: 2876
Joined: Mon May 16, 2016 4:39 pm
MMOC Member: Yes

Re: Clock

Postby palacebear » Sat Sep 01, 2018 7:11 pm

If it's electro-mechanical (usually identifiable by being polarity sensitive and by having a timekeeping regulator screw) then unless it's corroded internally it's usually just a lack of oil (they need lubricating every couple of years) or more likely carbon build-up on the tiny and very fragile contact pins attached to the escapement wheel.
They don't self-start either. Maybe hook it up to 12volts with correct polarity and give the hand adjusting knob a couple of firm and rapid push/release actions... might work ! :)
If it's transistorised (usually with regulator screw but not polarity sensitive) or quartz, I've yet to find a way of repairing them, although they seldom stop working completely; they just become erratic timekeepers.
1956 4-door called Max

les
Minor Maniac
Posts: 6906
Joined: Tue Feb 12, 2002 12:00 am
MMOC Member: No

Re: Clock

Postby les » Sat Sep 01, 2018 9:41 pm

Thanks for those tips, it is polarity sensitive so sounds like there's hope. I'll have to do a bit of tinkering!



Who is online

Users browsing this forum: No registered users and 4 guests