Clutch Pedal Return Spring

for those with Series MM sidevalve cars produced between September 1948 and February 1953
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
gtt1951
Minor Addict
Posts: 978
Joined: Thu Oct 04, 2012 5:01 pm
Location: Farnborough, Hampshire
MMOC Member: Yes

Clutch Pedal Return Spring

Post by gtt1951 »

How is this connected and which anchorage points should it be using?
This is a Side-Valve engine and Gearbox, converted from LHD to RHD.
Image
'50 Low-light with 918 Side-valve engine,
'51 High-light with Side-valve 918 engine,
'55 4-dr with 803 engine,
'56 Traveller with 1098 engine.
gtt1951
Minor Addict
Posts: 978
Joined: Thu Oct 04, 2012 5:01 pm
Location: Farnborough, Hampshire
MMOC Member: Yes

Re: Clutch Pedal Return Spring

Post by gtt1951 »

Drove the car up and down the cul-de-sac I live in, for a short road test and the return spring definitely needed to be connected.
Found the hole it goes into at the side of the R/H chassis leg.
Image
'50 Low-light with 918 Side-valve engine,
'51 High-light with Side-valve 918 engine,
'55 4-dr with 803 engine,
'56 Traveller with 1098 engine.
Post Reply