series MM inner front panel

for those with Series MM sidevalve cars produced between September 1948 and February 1953
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
ian.mcdougall
Minor Legend
Posts: 3287
Joined: Tue May 20, 2008 9:24 pm
Location: Co.Mayo Ireland
MMOC Member: Yes

series MM inner front panel

Post by ian.mcdougall »

Hi
Somebody who owned my series mm before me cut off the flange that the radiator bolts to on the inner front panel and replaced them with angle iron bolted onto the inner panel, so i want to reinstate as original .I noticed on my later traveller that the flange at the bottom does not stick out as much as the top so rad sits further forward at the bottom is it the same for the series mm . If anyone has a photo of the engine side of the inner panel it would be very helpful, or if anyone knows how it sits, it would be greatly appreciated.
Ian

RobThomas
Minor Legend
Posts: 2646
Joined: Thu May 11, 2006 10:34 am
Location: Cardiff
MMOC Member: Yes

Re: series MM inner front panel

Post by RobThomas »

DSC01012.jpg
DSC01012.jpg (265.75 KiB) Viewed 1266 times
Certainly looks further forwards at the bottom. Will look for a better pic. Rob
Cardiff, UK
ian.mcdougall
Minor Legend
Posts: 3287
Joined: Tue May 20, 2008 9:24 pm
Location: Co.Mayo Ireland
MMOC Member: Yes

Re: series MM inner front panel

Post by ian.mcdougall »

Hi Rob
Certainly looks like its forward at bottom the same as later cars just with a different shape the the sides

Post Reply