Page 3 of 3
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Sat Jan 11, 2020 11:13 pm
by don58van
Excellent!
What is particularly clever about your reproduction is the custom CAD and 3D printed housing.
Are you taking orders?
Don
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Sun Jan 12, 2020 9:08 am
by Declan_Burns
Thanks for the nice comments. I could do a small batch if anybody is interested.
Regards
Declan
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Sun Jan 12, 2020 12:15 pm
by JohnV
Declan_Burns wrote: ↑Sun Jan 12, 2020 9:08 am
Thanks for the nice comments. I could do a small batch if anybody is interested.
I would be interested, although I'd need to know a price to commit fully.
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Sun Jan 12, 2020 3:17 pm
by Declan_Burns
I will sit down and calculate the price over the next few days. I would estimate roughly 75€.
Regards
Declan
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Sun Jan 12, 2020 4:22 pm
by Declan_Burns
I decided I needed a one off smaller clock for my car so I had a go at a 52mm version.
It turned out quite well too. This clock is based on a 40x8mm round quartz movement and using a standard bezel and glass. The 3D printed housing is again designed to match the bezel, the glass and the movement. The dial was done on my inkjet printer with photo paper.
Regards
Declan
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Sun Jan 12, 2020 9:40 pm
by don58van
Another excellent creation, Declan.
I can't wait to see what you have for us tomorrow
Don
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Wed Jan 15, 2020 2:53 pm
by Declan_Burns
RobThomas wrote: ↑Mon Dec 30, 2019 6:57 pm
alte1.jpg
I'll try to find some better pics. Mine was 'made' in the same way as yours but based on an original owned by Carlo P.
I posted the designs on here a while ago but found that someone had copied the designs and was freely selling them on the inetrnet. NOT COOL! The drawing work was done by Gryf Ketcherside in the US. Very generous bloke.
Rob,
Any chance you could take a few pics of the the rev counter and the other instruments.
Regards
Declan
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Wed Jan 22, 2020 6:34 pm
by RobThomas
- dec2.JPG (84.96 KiB) Viewed 10966 times
- dec1.JPG (48.16 KiB) Viewed 10966 times
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Thu Jan 23, 2020 10:14 am
by Declan_Burns
Rob,
Many thanks!
Regards
Declan
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Sun Feb 02, 2020 11:41 am
by RobThomas
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Tue Feb 18, 2020 1:43 pm
by Declan_Burns
Thanks Rob,
I have saved it for future reference.
Regards
Declan
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Thu Aug 06, 2020 4:17 pm
by BillyDeroque
I was wondering if either of you are still producing these dash clock replicas.. I’d really like to buy one for my MM.
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Mon Oct 25, 2021 11:14 pm
by Coosh67
Obviously over a year ago now, but I’d be very interested in buying a clock if you fancy making another!
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Wed Dec 08, 2021 4:30 pm
by Declan_Burns
I have only seen this just now.
I will have to check but I think I have two or three.
Regards
Declan
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Wed Jan 19, 2022 8:41 am
by Declan_Burns
I have two that are finished and one in the making. One is reserved. The potential buyer pointed out to me that there is an original on ebay going for nearly £500 !!
Regards
Declan
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Wed Jan 19, 2022 12:42 pm
by Classiccars
Keep up the good work.we need people able to do these things to improve our cars
Re: MM & early SERIES 2 GLOVEBOX LID CLOCK
Posted: Wed Jan 19, 2022 6:17 pm
by myoldjalopy
Declan will soon be able to produce complete Morris Minors on his 3-D printer!!