Page 1 of 1

Dynamo part

Posted: Thu Aug 13, 2020 9:54 pm
by doughicks
Dropped the dynamo and broke the ear off the front end cap. Does anyone have a spare they would like to sell and ship to Canada. I am just looking for the front end cap that is at the pulley end. It is a C39.
Thanks.
Doug

Re: Dynamo part

Posted: Fri Aug 14, 2020 9:57 am
by win
Hi Doug
I have one number cast in it is 54210719 FR 39 spigot is 3.5", if anyone can confirm it is the correct one, you can have it.

Postage to Canada is approx £20 unless anyone can show me a cheaper way.

Regards Win

Re: Dynamo part

Posted: Fri Aug 14, 2020 1:46 pm
by doughicks
Win,
I will measure mine and get back to you.
Thanks,
Doug

Re: Dynamo part

Posted: Fri Aug 14, 2020 7:44 pm
by doughicks
Win,
I am attaching a couple of pics. The measurement between holes is 5 3/8" and spigot is 3.5".
Regards,
Doug

Re: Dynamo part

Posted: Fri Aug 14, 2020 8:24 pm
by pgp001
You may be able to get that TIG welded if you are struggling to find another one.

Phil

Re: Dynamo part

Posted: Sat Aug 15, 2020 10:10 am
by win
1597482185538244809298996380802.jpg
1597482185538244809298996380802.jpg (4.13 MiB) Viewed 314 times
1597482185538244809298996380802.jpg
1597482185538244809298996380802.jpg (4.13 MiB) Viewed 314 times
1597482185538244809298996380802.jpg
1597482185538244809298996380802.jpg (4.13 MiB) Viewed 314 times
1597482185538244809298996380802.jpg
1597482185538244809298996380802.jpg (4.13 MiB) Viewed 314 times
15974823428958880035049711753729.jpg
15974823428958880035049711753729.jpg (4.52 MiB) Viewed 314 times
This is mine if pic's work.
Regards Win

Re: Dynamo part

Posted: Tue Aug 18, 2020 4:37 pm
by doughicks
Have it in the welding shop and I"ll see how that turns out.
Thanks, everyone will let you know how it is once welded.