Types of roof lining material

for those with Series MM sidevalve cars produced between September 1948 and February 1953
gtt1951
Minor Addict
Posts: 948
Joined: Thu Oct 04, 2012 5:01 pm
MMOC Member: Yes

Types of roof lining material

Postby gtt1951 » Thu Apr 29, 2021 5:32 pm

Hello Colleagues,
By "roof lining" material, I mean the "backing boards" that the visible surface material is attached to.
When I got my 1950 low-light saloon, it was devoid of any roof lining.
I opportunely bought 2 sets of used roof lining boards, both of which are a thin plywood.
Both sets were missing the lower window trim.
I have removed the lower window trim from my 1951 High-light saloon, for a pattern, and the board is made from a type of card (oil card?), like the door cards, footwell panels and rear panel trims.
Does anyone know when the roof panel material changed?
My 1956 Series II face-lift Traveller has plywood lining panels, covered in what looks like rexine.

I need to fabricate the panel that fits below the rear small window.

The High-light's 3 main roof sections are oil (?) board and they are very badly warped - I was going to use one of the plywood sets to replace them.

Thanks, in anticipation,

George.
Image
'50 Low-light with 918 Side-valve engine,
'51 High-light with Side-valve 918 engine,
'55 4-dr with 803 engine,
'56 Traveller with 1098 engine.

Who is online

Users browsing this forum: No registered users and 1 guest