Morris Oxford Wheel Nuts

Instead of clogging up posts with off topic discussions, have them here. Keep it clean folks!
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
Bigrob
Minor Friendly
Posts: 97
Joined: Mon Jan 06, 2014 12:44 am
MMOC Member: No

Morris Oxford Wheel Nuts

Post by Bigrob »

Afternoon all.

We're having a bit of a dilemma.

My grandfather has a Morris Oxford series VI, and long story short, the wheels were put on with an air wrench and stripped the thread.


Does anyone know what size the thread is for replacement nuts?


Cheers all
1968 Trafalgar Blue 2 door- Pig
1970 Met Police 2 door- Panda
User avatar
twincamman
Minor Fan
Posts: 425
Joined: Thu May 10, 2007 12:22 pm
Location: Llanelli
MMOC Member: No

Re: Morris Oxford Wheel Nuts

Post by twincamman »

I think they're 7/16" UNF.
Try this guy:-
www.mistertee.co.uk
Bigrob
Minor Friendly
Posts: 97
Joined: Mon Jan 06, 2014 12:44 am
MMOC Member: No

Re: Morris Oxford Wheel Nuts

Post by Bigrob »

twincamman wrote: Tue Feb 16, 2021 3:20 pm I think they're 7/16" UNF.
Try this guy:-
www.mistertee.co.uk
Thank you, I did try him but he's not posting out at the moment.

They are 7/16 UNF, I may have found some, I'm just waiting for taper angle confirmation
1968 Trafalgar Blue 2 door- Pig
1970 Met Police 2 door- Panda
User avatar
twincamman
Minor Fan
Posts: 425
Joined: Thu May 10, 2007 12:22 pm
Location: Llanelli
MMOC Member: No

Re: Morris Oxford Wheel Nuts

Post by twincamman »

I think they're 60 degree, same as Ford. if that's the case, Burton Power might stock them.
Bigrob
Minor Friendly
Posts: 97
Joined: Mon Jan 06, 2014 12:44 am
MMOC Member: No

Re: Morris Oxford Wheel Nuts

Post by Bigrob »

twincamman wrote: Wed Feb 17, 2021 3:29 pm I think they're 60 degree, same as Ford. if that's the case, Burton Power might stock them.
That confirms what I measured, 60°. I'll have a look thank you
1968 Trafalgar Blue 2 door- Pig
1970 Met Police 2 door- Panda
Post Reply