Morris Minor Owners Club

Hi all just a quick word to let you all know I've bought my first ever Morris an 1968 ex Police car which I'm led to believe was from the Suffolk Police force.

Regards
Anthony[frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame]

Quick update guys
Car up on ramp started to take the interior out as shown in pictures
Fuel tank out
Parcels arrived from a Morris source
Two new rear wings
Front chassis leg repair section l/h
1/4 floor panel rear and front l/h
Rear chassis end repair section l/r wrong part I ordered not ever ordered parts before and company I bought from want me to pay to send back
Total £434.37

Few hours of welding and cutting to keep us going
[frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame][frame][/frame]

Ordered these parts today

1 x Rear Bootwell Panel (Saloon/Conv)
1 x Rear Spring Hanger Repair Section R/H
1 x Rear Spring Hanger Repair Section L/H
2 x Rear Spring Hanger Cover Plate

Total £110.64

Good luck with a very worthwhile project. They soon turn into a money pit don't they

i regret to say I have sent for scrap some in better condition than this, but I did not have the facilities you seem to have access to.

What you can do is make full list of everything you need, most suppliers do bulk discount of approx 5-10% and postage costs might work out cheaper for one full order

It's my mates workshop so he's helping me out lots as he knows his stuff I'm just learning as I go , I'm in no real rush to get it done but as I'm off for a while get what I can and welded

Can anyone pls tell me which panel I need to replace a rust section on the outer skin between the door and wheel arch pls

Anthony

I think Its called side panel repair but not 100 % sure[frame][/frame]

RP133L (The L & R refer to left and right when you sit in the car facing forward)

http://morrisminorspares.co.uk/shop/pro ... d09677305e

Cheers thanks for that

Cutting out of the old metal has started[frame][/frame][frame][/frame][frame][/frame][frame][/frame]

Found some more rust once headlight taken out[frame][/frame]

Head taken off as no compression in number 2 and also getting it converted to unleaded[frame][/frame]

Head on bench ready to go

Almost put in on left hand rear[frame][/frame]

Both front wings taken off as rotten, also welding off right side rear hanger started[frame][/frame][frame][/frame][frame][/frame][frame][/frame]

Hi mike
The idea is to return it to a police car, I thought the interior was meant to be red but I could be wrong ?

Regards
Anthony

I think the majority of "Panda Cars" did have black interiors but a friend had one many years ago - fairly soon after it was decommissioned and that had a red interior which I'm sure was original. Like your it was the "basic" pattern with no flutes in the door cards and no armrests in the rear. Various different Police Forces purchased these cars new and the specification will have varied a bit between forces.

Just got my rocker cover back from the blasters[frame][/frame]

Any ideas if I can fix a small pin hole in rocker cover or should I leave it please