Steves Morris Traveller 1970

Let us all know what you are up to with your current restoration project. Get that Minor on the road!
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by greendefender123 »

I just use whatever I find in mothers or the girlfriends kitchens. Think they used engine degreaser on my seats which have come up like new.
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by greendefender123 »

Well im back on it today. Got the nearside suspension stripped eventually. The torsion bar arm was stuck solid even tho it was moving on the splines. Got it off in the end tho. Trunnions and the swivels look in good nick and don't have play in them. Still had grease in them aswell. Il just clean and paint it and fit the new seals from Declan. Moving on to the eyebolt and pin they are completely worn. So iv just ordered new ones. Strange they've worn so bad as the other side was still good and is save able with some polybushes. That's all for now. Wont be doing much more this week. Tho will hopefully get the chance to start the paint prep for the suspension parts.
20170328_114730_zpsxnyodavx.jpg
20170328_114730_zpsxnyodavx.jpg (256.3 KiB) Viewed 14753 times
20170328_114746_zpsuzf0cqrw.jpg
20170328_114746_zpsuzf0cqrw.jpg (270.94 KiB) Viewed 14753 times
20170328_114737_zpsfynnlekv.jpg
20170328_114737_zpsfynnlekv.jpg (321.33 KiB) Viewed 14753 times
20170328_114802_zpscegd1dnj.jpg
20170328_114802_zpscegd1dnj.jpg (401.77 KiB) Viewed 14753 times
20170328_114815_zpsic7zoabg.jpg
20170328_114815_zpsic7zoabg.jpg (174.24 KiB) Viewed 14753 times
20170328_115008_zpsdtqlozca.jpg
20170328_115008_zpsdtqlozca.jpg (355.61 KiB) Viewed 14753 times
20170328_115015_zpscgoqpo8m.jpg
20170328_115015_zpscgoqpo8m.jpg (212.52 KiB) Viewed 14753 times
Iv fitted an extra grease nipple aswell to the lower trunnions
20170328_122048_zpslciih2u9.jpg
20170328_122048_zpslciih2u9.jpg (178.78 KiB) Viewed 14753 times
Last edited by greendefender123 on Sat Jul 08, 2017 9:43 am, edited 1 time in total.
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by greendefender123 »

Just replaced the track rod boot and end whilst clearing up. It's all the little jobs that make it come together.
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by greendefender123 »

Just been cleaning up the swivel for painting. Only giving it a quick coat of paint. Just had my order come through with the eyebolt and pin. Also ordered the chrome for the front. Some plugs as theyre cheap with this company and some bulbs. They came well packaged.
20170331_121021_zps217s9fej.jpg
20170331_121021_zps217s9fej.jpg (193.11 KiB) Viewed 14752 times
20170331_121524_zpsvtz9odu3.jpg
20170331_121524_zpsvtz9odu3.jpg (184.48 KiB) Viewed 14752 times
Last edited by greendefender123 on Sat Jul 08, 2017 9:46 am, edited 1 time in total.
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: Steves Morris Traveller 1970

Post by Smithy1961 »

The chrome looks good quality [comes with the screws too].
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by greendefender123 »

Yeah it looks very good. Especially the hockey sticks. The top rail has loads of warnings not to tighten it up up much. Stickers saying that everywhere. Looks like only slightly more than finger tight then. All from gsjones as esm were out of stock and slightly dearer.
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: Steves Morris Traveller 1970

Post by Smithy1961 »

yes just over finger tight and maybe some locktight or something so it dont move
ManyMinors
Minor Legend
Posts: 2752
Joined: Tue Nov 11, 2014 9:41 am
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by ManyMinors »

If they made them properly in the first place they wouldn't need the "warnings"! What you really need to do is to make up a spacer to slide over the threads before you fit the top trim. The spacers will then keep the trim in the correct position. Without the spacer the temptation is to keep on tightening and pulling the trim out of shape - or simply pull the stud off :o . The original trims were a casting which used a boss to do this job. On later cars a pressed trim was used and employed a plastic spacer instead but often these have been discarded. Do you still have these Steve? If not, then careful trial fitting should show you roughly how long they need to be. Goodness knows why these aren't provided........
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by greendefender123 »

Yes iv still got the old one with spacers on. Il pop then on. Could easily make some spacers tho. Surprising they dont come with any if its that big a problem for them. Some of old studs broke off which was part of the reason to replace it. Along with the corrosion. Probably could of saved the hockey sticks with more effort but the threads had stripped. Thanks for the advice.
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by greendefender123 »

Got the suspension back together on the n/s. Had to replace the top trunnion as it had play in it. Which was only noticeable once back on the car. Luckily I had a spare so put that on. No play now. Fitted the new brake pipe between the cylinders. I hax painted everything quickly before i refitted it all. I put a smear of red rubber grease on the wheel cylinders as they were starting to stick. I greased the wheel bearings. Hopefully they'll be ok, Feel and sound it. Greased the track rod end tho don't think it took any. Its all back together that side now. Tho I will check the nuts and bolts are all tight.

Iv fitted polybushes on it except the inner tie rod where I fitted a rubber one. Apart from the brake pipe and tyre that corner is finished.
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by greendefender123 »

Loads done. Front suspension completed on both sides and all painted with in gloss black. Wheel bearings greased up no play in them and spin smoothly. New track rod end and boots fitted and rack filled with grease. Fitted new brake pipes to the flexys from the t piece. They're good quality. I'm glad I paid extra for pre made ones. Just need bending and fitting. Took ages on my landy with some steel ones in place. I drained and refilled the shocks. Just need to finish refitting as im struggling to find the holes for the split pins. Changed the brake pipes on the axle. Only two pipes to do then the brakes can be bled.
20170407_132828_zpsq1yfrgif.jpg
20170407_132828_zpsq1yfrgif.jpg (209.2 KiB) Viewed 14749 times
I took it for a quick spin around the field to warm the engine oil up. I drained it and tackled the filter. Once I worked how the seal went it was really easy. I filled the filter with oil and refitted. No leaks so I don't think il be changing to a spin on filter. Didnt seem much worse than the astra and didn't get oily like when doing the landy.
20170407_133036_zpsnk9oospr.jpg
20170407_133036_zpsnk9oospr.jpg (210.84 KiB) Viewed 14749 times
Jobs left for the mot are mainly finishing the brakes, finishing off the electrics, waxoyling so the kick plates and transmission tunnel can be refitted, painting needs finishing. Iv got half a litre left which will hopefully do the roof and front panel. Painting the wheels and fitting the new tyres. Still other jobs that need doing. But im getting some where.

I also need to remove the front wings again and fit some rivnuts as I broke a nut off on the drivers side and the passenger side wants moving.

So close yet so far.
Last edited by greendefender123 on Sat Jul 08, 2017 9:42 pm, edited 1 time in total.
amgrave
Minor Addict
Posts: 985
Joined: Mon May 26, 2014 3:26 pm
Location: North Kent
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by amgrave »

Well done, good progress there. The end must be in sight now? :D

greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by greendefender123 »

Thank you. Here's some pictures.

Image

Image

Image
Image

Image
SteveClem
Minor Legend
Posts: 1904
Joined: Sun Jul 03, 2011 11:37 am
Location: Near Belper
MMOC Member: Yes

Re: Steves Morris Traveller 1970

Post by SteveClem »

You must feel very proud to have made all that progress...despite not being in tip top health. It's looking so good!
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by greendefender123 »

Thanks Steve. Its nice knowing I can still achieve things. Even if only a couple of hours on good days. Cant wait to get it done not that it's a rush but my landy needs some attention and the mot is due in June.
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by greendefender123 »

Just bled the brakes today wit the girlfriend. Bled it loads but feels like it's got air in there. Brakes work but pedal goes down quite far. Anything to look for? No leaks since I tightened a union. Does loosening the brake switch help whilst under pressure? I couldn't get it to lose tho can try again.

Thanks Steve
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: Steves Morris Traveller 1970

Post by Smithy1961 »

Steve you said the pedal goes down a lot but how firm is it ?
Do you have a firm pedal
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by greendefender123 »

It goes down quite far. Still stops the car. I cant remember what it felt like was afew hours ago. Tho I remember thinking im gonna lock the adjusters tight and see how it feels. Pedal might even need adjusting aswell as I had it apart and think I changed or straightened the pin that goes into the master cylinder as it was slightly bent. Might also gravity bleed the the brakes. Sorry annoyed with myself now can't remember properly. Definitely had brakes as I thought atleast that's done now till the mot.
Smithy1961
Minor Fan
Posts: 147
Joined: Thu Nov 10, 2016 9:02 am
MMOC Member: Yes

Re: Steves Morris Traveller 1970

Post by Smithy1961 »

Well a bit of a flaw with these brakes is the swept displacement and badly positioned bleed nipples [a result of morris using the same parts bin on most cars I expect] so forcing the air out can be tricky.
I unadjust the brakes so the fliud displaces the clyds more and then as the brake shoes pull them shut it forces air out the nipple .

The pedal height requires that the brakes are correctly adjusted however i wonder that if you played with the M/C rod that your problem lies there .
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: Steves Morris Traveller 1970

Post by greendefender123 »

Thanks smithy just been out this morning the brake pedal seems good. I forgot about the master cylinder cover and transmission tunnel. With these held in place the pedal is only abit low and feels quite firm. I will probably try and bleed them again later on and possibly adjust the pedal height if it still low.

Thanks Steve
Post Reply