Im looking at engine options again, what would i need to do to fit a 1275 spridget engine to the marina gearbox? Is it as simple as bolting on the marina backplate and flywheel?
I doubt this very much, but would a minor/spridet engine and g/box attach straight to the marina propshaft that I have on my car?
Spridget engine marina box?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 3824
- Joined: Fri Apr 16, 2004 1:30 pm
- Location: Shropshire/Sussex/Cumbria
- MMOC Member: No
Spridget engine marina box?
Serial Morris Minor Owner and Old Vehicle Nutter
www.facebook.com/transitionclassics
www.facebook.com/transitionclassics
-
- Minor Fan
- Posts: 349
- Joined: Mon May 28, 2007 10:32 am
- Location: Rolleston N/Z
- MMOC Member: No
If you used a minor box then a minor prop wld fit. Tho i went through a couple minor boxes with my Ital engine so prob not the best idea!
However,i removed the Ital back plate and flywheel and fitted the Midget parts. The only Mod was i fitted a shim between the crank and flywheel as the flywheel just scuffed the back plate.
I dont mean to sound like the snotty new boy and i mean no offence.
I do agree with the type 9 tho!
However,i removed the Ital back plate and flywheel and fitted the Midget parts. The only Mod was i fitted a shim between the crank and flywheel as the flywheel just scuffed the back plate.
I dont mean to sound like the snotty new boy and i mean no offence.
I do agree with the type 9 tho!