Marina disc brakes
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 1024
- Joined: Fri Dec 18, 2009 5:06 pm
- Location: Nottingham
- MMOC Member: No
Marina disc brakes
I Have a set of marina front disc on the 'project car' which i am going to take off and put onto anne for everday use. They are however still marina pcd and was wondering what was involved to covert them to minor pcd? Any one done this or know who to ask for the parts required?
___Anne___
- d_harris
- Minor Legend
- Posts: 4388
- Joined: Thu Apr 15, 2004 3:52 pm
- Location: Sunny Brighton
- MMOC Member: No
Re: Marina disc brakes
You need to get your local machine shop to re-drill them to 4"
its not a paticuarly complex job.
its not a paticuarly complex job.
-
- Minor Legend
- Posts: 1989
- Joined: Wed May 10, 2006 1:47 pm
- Location: Aldershot
- MMOC Member: No
Re: Marina disc brakes
get in touch with esm as they did at one stage do them on an exchange basis
-
- Minor Legend
- Posts: 1024
- Joined: Fri Dec 18, 2009 5:06 pm
- Location: Nottingham
- MMOC Member: No
Re: Marina disc brakes
Is it possible for anyone to post up a photo of the converted hub so i can see whats involved?
___Anne___
Re: Marina disc brakes
Have a look here.http://mog.myfreeforum.org/about2231.html
Page three,about half way down.You can see the back of the hub and what has been done to it...
I had my marina hubs redrilled to 100mm and bigger studs fitted.
Page three,about half way down.You can see the back of the hub and what has been done to it...
I had my marina hubs redrilled to 100mm and bigger studs fitted.
-
- Minor Legend
- Posts: 1024
- Joined: Fri Dec 18, 2009 5:06 pm
- Location: Nottingham
- MMOC Member: No
Re: Marina disc brakes
Will it be possible to just fit new studs the same diameter as the minor ones? Or re-fit the marina ones?
___Anne___
Re: Marina disc brakes
marina studs have a bigger spline diameter but are the same thread as the moggy.
If you are fitting alloy wheels then change to thicker studs( i used montego studs)
If you are fitting alloy wheels then change to thicker studs( i used montego studs)
-
- Minor Fan
- Posts: 329
- Joined: Thu Sep 30, 2010 4:34 pm
- MMOC Member: No
Re: Marina disc brakes
you can buy new marina hubs with moggy PCD from ESM.
Will
________1967-Lily________________________1963-Phoebe_______________________1965-Dobby_________
________1967-Lily________________________1963-Phoebe_______________________1965-Dobby_________
Re: Marina disc brakes
I have a pair of Marina hubs converted to Moggi PCD, i now require a pair of Marina PCD hubs would you be interested in doing a swap ?
-
- Minor Legend
- Posts: 1024
- Joined: Fri Dec 18, 2009 5:06 pm
- Location: Nottingham
- MMOC Member: No