Page 1 of 1
Fan Belt
Posted: Thu Jun 16, 2011 10:21 pm
by Greengrass
Does any body know the size off belt if you have an alternator on its different to the dynamo
Re: Fan Belt
Posted: Thu Jun 16, 2011 10:38 pm
by bmcecosse
I use 825 belt. I believe some manage to squeeze on an 813 belt - but the 825 has always been fine for me. Sorry - it's a long long time since i used a dynamo! But I think it would be fine on that too.
Re: Fan Belt
Posted: Fri Jun 17, 2011 12:25 am
by mike.perry
The dynamo has a larger pulley so it should need a longer fan belt. It depends on how much adjustment there is on the dynamo or alternator. Its a long time since I have used a dynamo on an A Series engine
Re: Fan Belt
Posted: Fri Jun 17, 2011 6:45 am
by Declan_Burns
I have an 838 on mine and it's fine.[frame]
[/frame]
Regards
Declan
Re: Fan Belt
Posted: Fri Jun 17, 2011 8:37 am
by Greengrass
Ill get one off each
Re: Fan Belt
Posted: Fri Jun 17, 2011 9:04 am
by 8009STEVE
Just ask for a Mini belt, with alternator fitted
Re: Fan Belt
Posted: Fri Jun 17, 2011 9:58 am
by bmcecosse
Mini belt is unlikely to be correct - the Mini has a much larger water pump pulley and needs a longer belt......... From Declans picture you can see that the adjustment is out at full stretch - the 825 is the correct belt.
Re: Fan Belt
Posted: Fri Jun 17, 2011 3:41 pm
by Declan_Burns
bmcecosse wrote:Mini belt is unlikely to be correct - the Mini has a much larger water pump pulley and needs a longer belt......... From Declans picture you can see that the adjustment is out at full stretch - the 825 is the correct belt.
Yes, not much adjustment left, the 825 would indeed be better.
Regards
Declan
Re: Fan Belt
Posted: Fri Jun 17, 2011 10:17 pm
by Greengrass