engine number

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
mr.bird
Minor Friendly
Posts: 22
Joined: Wed Aug 23, 2017 10:27 pm
MMOC Member: No

engine number

Post by mr.bird »

heiio all,i presume this is the number stamped on the block by spark plug no 1 left hand side of the block.
firedrake1942
Minor Legend
Posts: 2942
Joined: Tue Aug 25, 2015 6:07 pm
MMOC Member: No

Re: engine number

Post by firedrake1942 »

yup
firedrake1942
Minor Legend
Posts: 2942
Joined: Tue Aug 25, 2015 6:07 pm
MMOC Member: No

Re: engine number

Post by firedrake1942 »

yup should be on a plate 'riveted' at each end
mr.bird
Minor Friendly
Posts: 22
Joined: Wed Aug 23, 2017 10:27 pm
MMOC Member: No

Re: engine number

Post by mr.bird »

the number i have is stamped into the steel of the block.which is kar7716 and near the base of the dip stick is a .plate with 1100 pressed into it?
palacebear
Minor Legend
Posts: 2953
Joined: Mon May 16, 2016 4:39 pm
Location: Kidderminster, Worcestershire.
MMOC Member: Yes

Re: engine number

Post by palacebear »

Not sure about either of those. Assuming the original 948cc Minor engine is still fitted, the engine number should be either 9M-U-H (high compression) or 9M-U-L (low compression) followed by 6-digit number. Is there an engine number quoted on the V5 reg document? Does the cylinder block have '950' cast into it somewhere adjacent to the exhaust downpipe?
Last edited by palacebear on Thu Aug 31, 2017 9:18 pm, edited 2 times in total.
1956 4-door called Max
firedrake1942
Minor Legend
Posts: 2942
Joined: Tue Aug 25, 2015 6:07 pm
MMOC Member: No

Re: engine number

Post by firedrake1942 »

The 1100 is indicative that it is 1098 originally. I don't recognise the engine no.

I cannot find it on this list

http://gerardsgarage.com/Garage/Tech/BM ... odesLO.htm

or this one

http://www.mg-cars.org.uk/news/news498.html

This what the engine no should be on.

Someone more expert will no doubt be along shortly....
Attachments
mbimage.php.jpeg
mbimage.php.jpeg (82.17 KiB) Viewed 3616 times
les
Minor Maniac
Posts: 8740
Joined: Tue Feb 12, 2002 12:00 am
Location: kent
MMOC Member: Yes

Re: engine number

Post by les »

The 1100 on a thin aluminium plate, signifies a 1098cc engine capacity. There should be a raised casting number on the block. Can't help with the one stamped in it. As above the engine number is stamped into an aluminium strip, front left.

mr.bird
Minor Friendly
Posts: 22
Joined: Wed Aug 23, 2017 10:27 pm
MMOC Member: No

Re: engine number

Post by mr.bird »

img1303
philthehill
Minor Maniac
Posts: 10772
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: engine number

Post by philthehill »

The 10ME engine has the closed circuit breathing system.

les
Minor Maniac
Posts: 8740
Joined: Tue Feb 12, 2002 12:00 am
Location: kent
MMOC Member: Yes

Re: engine number

Post by les »

Where did you find that number, mr bird?

mr.bird
Minor Friendly
Posts: 22
Joined: Wed Aug 23, 2017 10:27 pm
MMOC Member: No

Re: engine number

Post by mr.bird »

where firedrake 1942 has an alluminium plate riveted to the block near spark plug no 1 ihave kar 7716 stamped.
philthehill
Minor Maniac
Posts: 10772
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: engine number

Post by philthehill »

I would suggest that the engine has been reconditioned and the number quoted is the reconditioning companies engine identification number.
A picture of the number and plate by the dip stick would be appreciated.
Phil

mr.bird
Minor Friendly
Posts: 22
Joined: Wed Aug 23, 2017 10:27 pm
MMOC Member: No

Re: engine number

Post by mr.bird »

IMG_3017.JPG
IMG_3017.JPG (1.11 MiB) Viewed 3451 times
IMG_3013.JPG
IMG_3013.JPG (1.94 MiB) Viewed 3451 times
firedrake1942
Minor Legend
Posts: 2942
Joined: Tue Aug 25, 2015 6:07 pm
MMOC Member: No

Re: engine number

Post by firedrake1942 »

The 1100 / 950 plate, where present, is usually on the manifold side of the engine. I think Phil is probably right, a recon engine but not gold or silver seal i.e. non- manufacturer
philthehill
Minor Maniac
Posts: 10772
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: engine number

Post by philthehill »

Thank you for posting the photos.
The stamped 1100 plate is in its correct position on the N/S front of the engine block and not the O/S of the engine and is not near the dipstick.
The pipe adjacent to the 1100 plate is the engine breather pipe and not the dipstick.
The stamped number is the recon engine number. Do you have an invoice for the reconditioning of the engine in the vehicle history file?

For general consumption:- What ever vehicle you have it is most important to have a full record of what has been done to the vehicle and parts purchased for future reference.

Phil

palacebear
Minor Legend
Posts: 2953
Joined: Mon May 16, 2016 4:39 pm
Location: Kidderminster, Worcestershire.
MMOC Member: Yes

Re: engine number

Post by palacebear »

Thanks for that info Phil. Although it doesn't apply to me (yet!) it would never occur to me that a recon engine from an 'independent' source would have an alien number on it!
1956 4-door called Max
philthehill
Minor Maniac
Posts: 10772
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: engine number

Post by philthehill »

If I was an engine reconditioner I would always ensure that my own serial number was stamped on the block so that if any problems occurred the engine could be identified as having been reconditioned by me otherwise any old engine could be returned.
My Oselli modified 1275cc Midget block and my Manx Racing 1275cc cylinder head have both got their unique identification numbers stamped on them.
Phil

StillGotMy1stCar
Minor Fan
Posts: 433
Joined: Wed Jun 07, 2017 11:37 pm
Location: Carmarthenshire
MMOC Member: No

Re: engine number

Post by StillGotMy1stCar »

A good chance your engine was reconditioned by KAR engine services in Barnstaple.
Regards John
StillGotMy1stCar
Minor Fan
Posts: 433
Joined: Wed Jun 07, 2017 11:37 pm
Location: Carmarthenshire
MMOC Member: No

Re: engine number

Post by StillGotMy1stCar »

A quick search on here shows they also supply engines to Bull Motif.
Regards John
mr.bird
Minor Friendly
Posts: 22
Joined: Wed Aug 23, 2017 10:27 pm
MMOC Member: No

Re: engine number

Post by mr.bird »

Thanks for all the replies and help,will carry on with the investigations now I've got a few leads.
Post Reply