Rear dampers
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Rear dampers
I am about to try to take off the rear dampers to check the fluid,there is a rubber bush between the arm of the damper and the arm that attaches to the body.When I rang the spares dealership they said I need 2 each side of the nut but I can’t see 2 in place only 1.Has anyone got a part number for the correct rubber bush
-
- Minor Maniac
- Posts: 10772
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Rear dampers
The bush that is at the end of the link attached to the damper arm is not replaceable - it is part of the link.
If the bush at the damper arm end is worn the whole link has to be replaced.
The replaceable bushes are at the end of the link where it attaches to the chassis leg.
http://www.morrisminorspares.com/rear-s ... is-p831366
See note regarding link arm chassis bushes
https://www.moss-europe.co.uk/bush-link ... soc=138866
Poly bushes for this application are available and I would recommend their use.
http://www.morrisminorspares.com/rear-s ... de-p831342
If the bush at the damper arm end is worn the whole link has to be replaced.
The replaceable bushes are at the end of the link where it attaches to the chassis leg.
http://www.morrisminorspares.com/rear-s ... is-p831366
See note regarding link arm chassis bushes
https://www.moss-europe.co.uk/bush-link ... soc=138866
Poly bushes for this application are available and I would recommend their use.
http://www.morrisminorspares.com/rear-s ... de-p831342