Series II gearbox question...?

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
User avatar
geoberni
Minor Legend
Posts: 3589
Joined: Fri Aug 04, 2017 11:19 am
Location: North Leicestershire
MMOC Member: Yes

Series II gearbox question...?

Post by geoberni »

Hi All
So, I've been scouring the gearbox exploded view diagram in the manual, but I can't find an answer to this....

What on earth is this little connection at the back of the gearbox, under the Speedo cable?

(if anyone is wondering what the nice green circle is, that's sticky tape on the inside floor, where the gearbox filler bung should be, I recently discovered mine was missing :wink: )
20180919_100715.jpg
20180919_100715.jpg (606.38 KiB) Viewed 828 times
Basil the 1955 series II

Image
StillGotMy1stCar
Minor Fan
Posts: 434
Joined: Wed Jun 07, 2017 11:37 pm
Location: Carmarthenshire
MMOC Member: No

Re: Series II gearbox question...?

Post by StillGotMy1stCar »

Gearbox steady cable, yours has been cut off. It should be attached to the mounting cross member, it is to stop the fan from going into the radiator under heavy braking.http://www.morrisminorspares.com/gearbo ... le-p830861
Regards John
User avatar
geoberni
Minor Legend
Posts: 3589
Joined: Fri Aug 04, 2017 11:19 am
Location: North Leicestershire
MMOC Member: Yes

Re: Series II gearbox question...?

Post by geoberni »

Arh...
heard of that :)

Actually, it's not been cut, it's just not under any tension. I'd zoomed the image in a bit before uploading it. Here's the wider view. Perhaps it needs a little adjustment?
I've just read up on it, now I know it's in the engine section (AA.36) :roll:
It does say 'tensioned so as to prevent any forward movement.... Care must be taken not to impose too great a tension' So getting rid of that kink might be useful!

many thanks John
Attachments
20180919_100715A.jpg
20180919_100715A.jpg (1005.06 KiB) Viewed 820 times
Basil the 1955 series II

Image
myoldjalopy
Minor Legend
Posts: 2533
Joined: Tue Jan 29, 2013 10:32 pm
Location: Kernow
MMOC Member: Yes

Re: Series II gearbox question...?

Post by myoldjalopy »

Yes, just adjust it so its straight without being overly taut and all will be well......
User avatar
geoberni
Minor Legend
Posts: 3589
Joined: Fri Aug 04, 2017 11:19 am
Location: North Leicestershire
MMOC Member: Yes

Re: Series II gearbox question...?

Post by geoberni »

Now why haven't we got a Thumb Up Smilie.... :wink:
Thanks
Basil the 1955 series II

Image
Post Reply