- 15-Drilled hole ready for roll-pin.jpg (332.83 KiB) Viewed 550 times
- 16-Roll-pin inserted.jpg (279.43 KiB) Viewed 550 times
- 17-Cutting roll-pin to size.jpg (277.3 KiB) Viewed 550 times
- 18-Operation completed.jpg (297.77 KiB) Viewed 550 times
Removing boot lock barrel - Step by Step Guide - Part 4
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
gtt1951
- Minor Addict
- Posts: 978
- Joined: Thu Oct 04, 2012 5:01 pm
- Location: Farnborough, Hampshire
- MMOC Member: Yes
Removing boot lock barrel - Step by Step Guide - Part 4
Hole drilling completed and ready for roll-pin (retaining pin) insertion
Insert the roll-pin (or other type of retainer)
Now cut the retaining pin to size
After cutting, the finished assembly
Replace in the boot lid and stand back to admire your work.
'50 Low-light with 918 Side-valve engine,
'51 High-light with Side-valve 918 engine,
'55 4-dr with 803 engine,
'56 Traveller with 1098 engine.