Hi there
I have just bought a 1275 engine complete with gearbox, I believe it’s a+ engine code starts with 12v e-h could someone confirm this?
My main question is can the gearbox be used in the minor, I’m guessing the engine and box was out of a ital, any benefits to be had using it and is it a easy conversion
Thanks
Andy
Ital engine and gearbox
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 687
- Joined: Sun Apr 19, 2009 8:55 pm
- Location: kenilworth
- MMOC Member: No
Ital engine and gearbox
[sig]9671[/sig]
Re: Ital engine and gearbox
It sounds as though it is indeed an Ital one, if this thread is anything to by:
viewtopic.php?t=50187
I understand a Marina/Ital gearbox can be fitted but as they are a lot bulkier than the Minor one, a fair bit of modifying is required to make it all fit - see this thread about it:
viewtopic.php?t=62434
viewtopic.php?t=50187
I understand a Marina/Ital gearbox can be fitted but as they are a lot bulkier than the Minor one, a fair bit of modifying is required to make it all fit - see this thread about it:
viewtopic.php?t=62434
Maurice, E. Kent
(1970 Traveller)
(1970 Traveller)
-
- Minor Maniac
- Posts: 10859
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Ital engine and gearbox
The main identifier of a 1275cc 'A' Plus engine is the additional ribbing on the block. If it does not have the ribbing it is just an ordinary Marina block. Also the distributer is secured with a 'Y' shaped yoke and not the clamp as per the Minor.
Below is a Marina 'A' Plus engine. Note the additional ribbing.
The gearbox will fit but you will have to modify the body as the Marina/Ital bell housing/rear engine plate is very much larger.
Below is a Marina 'A' Plus engine. Note the additional ribbing.
The gearbox will fit but you will have to modify the body as the Marina/Ital bell housing/rear engine plate is very much larger.