hi guys
looking for the bolt sizes as ringed on picture oil filter and alternator /dynamo
bolt sizes?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 198
- Joined: Sat Oct 04, 2014 9:59 pm
- Location: pitmedden aberdeenshire
- MMOC Member: Yes
-
- Minor Maniac
- Posts: 10802
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: bolt sizes?
The bolts for the alternator/dynamo bracket are 5/16" x 11/16" UNF.
As regards securing the oil filter head you can have either 3/8" UNC studs with 3/8" UNF threaded outer ends with 3/8" UNF nuts or 3/8" UNC bolts.
With both types of filter head fastenings the threads in the block are 3/8" UNC.
The length of the filter head stud/bolt will depend upon the filter head fitted.
Here is the link to the MOSS Midget site which has the various types of oil filter head with mounting bolts/studs:-
https://www.moss-europe.co.uk/shop-by-m ... 58-66.html
As regards securing the oil filter head you can have either 3/8" UNC studs with 3/8" UNF threaded outer ends with 3/8" UNF nuts or 3/8" UNC bolts.
With both types of filter head fastenings the threads in the block are 3/8" UNC.
The length of the filter head stud/bolt will depend upon the filter head fitted.
Here is the link to the MOSS Midget site which has the various types of oil filter head with mounting bolts/studs:-
https://www.moss-europe.co.uk/shop-by-m ... 58-66.html
Last edited by philthehill on Sat Apr 04, 2020 8:32 am, edited 1 time in total.
-
- Minor Fan
- Posts: 198
- Joined: Sat Oct 04, 2014 9:59 pm
- Location: pitmedden aberdeenshire
- MMOC Member: Yes