hi all
just fitted a new thermostat housing to by ongoing engine build
and the stud seem a bit short ie the nuts with washer go on ok but i would like to see a bit more thread out of the top of the nuts
what size /length are the standard ones and are longer ones available ?
cheers stu
thermostat studs
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 199
- Joined: Sat Oct 04, 2014 9:59 pm
- Location: pitmedden aberdeenshire
- MMOC Member: Yes
-
- Minor Fan
- Posts: 199
- Joined: Sat Oct 04, 2014 9:59 pm
- Location: pitmedden aberdeenshire
- MMOC Member: Yes
Re: thermostat studs
oops me bad i should have stated its a 1275 engine build
not sur if the 1275 thermostat housing is taller??
not sur if the 1275 thermostat housing is taller??
-
- Minor Maniac
- Posts: 10811
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: thermostat studs
Take your choice.
http://www.minispares.com/search/classi ... studs.aspx
You can use three spare rocker pillar studs with either an additional spacer between housing and nut or cut a deeper thread on the stud.
http://www.minispares.com/search/classi ... studs.aspx
You can use three spare rocker pillar studs with either an additional spacer between housing and nut or cut a deeper thread on the stud.
-
- Minor Fan
- Posts: 199
- Joined: Sat Oct 04, 2014 9:59 pm
- Location: pitmedden aberdeenshire
- MMOC Member: Yes