Does any body know what seals l need to refill my shock absorbers with new oil ?
They look like ,copper crush washers ,but not sure . Is the filler washer the same as the drain / valve ?
Gary
Shock absorber seals
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 41
- Joined: Mon Apr 08, 2019 7:07 pm
- MMOC Member: Yes
-
- Minor Legend
- Posts: 1956
- Joined: Wed Apr 18, 2007 7:32 am
- Location: Düsseldorf, Germany
- MMOC Member: No
Re: Shock absorber seals
Gary,
The thread on the filler plug is 5/16" x 26 BSB. A copper crush washer 8mmID will fit. I have used fibre washers 8x14x1.5mm without any issues. I fitted reservoirs on my front dampers for inspection and filling purposes.
Regards
Declan
The thread on the filler plug is 5/16" x 26 BSB. A copper crush washer 8mmID will fit. I have used fibre washers 8x14x1.5mm without any issues. I fitted reservoirs on my front dampers for inspection and filling purposes.
Regards
Declan
- Attachments
-
- Reservoir_3.jpg (325.83 KiB) Viewed 419 times
Regards
Declan