hi All
i have just tried to fit a 1275 dampered pulley to my rebuilt 1275 midget engine and
it seem that the pulley fouls to timing cover ?
any one else had this problem is there a fix or mod to solve this ??
thanks in advance for any info
Cheers
Stu
1275 dampered pulley
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
stuupnorth
- Minor Fan
- Posts: 198
- Joined: Sat Oct 04, 2014 9:59 pm
- Location: pitmedden aberdeenshire
- MMOC Member: Yes
Re: 1275 dampered pulley
Is it the riveted on disc at the back of the pulley? If so just drill the rivets out and remove the section as it serves no useful purpose.
You can see the same pulley on my engine with the disc removed
You can see the same pulley on my engine with the disc removed
Last edited by panky on Thu Mar 18, 2021 10:17 pm, edited 1 time in total.
-
stuupnorth
- Minor Fan
- Posts: 198
- Joined: Sat Oct 04, 2014 9:59 pm
- Location: pitmedden aberdeenshire
- MMOC Member: Yes
Re: 1275 dampered pulley
ah
i have just looked on here
https://www.moss-europe.co.uk/pulley-cr ... 13664.html
and noticed that the mg one doesnt have the rear part on the pulley so off it going LOL
many thanks for the reply
i have just looked on here
https://www.moss-europe.co.uk/pulley-cr ... 13664.html
and noticed that the mg one doesnt have the rear part on the pulley so off it going LOL
many thanks for the reply
