Temperature sender adapter

Post by **Stanmo** » Thu Mar 18, 2021 7:32 pm

Apologies for the continued questioning around the temp gauge on my Morris Minor 1000.This apparently simple task is turning into a nightmare!!!!

I've finally got it all ready only to discover that the adapter which holds the sender is way to big for the block. The blanking plug actually fits into the adapter so I'm assuming that the sender thread is 5/8UNP. (I think)

I need an adapter which will take the 5/8 sender and then screw into the block, but as in the image the sender has an angled seat which is secured and sealed when screwed into the adapter. So I think I need a 5/8 female to 5/8 male with an angled seat for the sender???

Could someone advise if this is correct, the part needed, its actual name and where I could get one???

Post by **stuupnorth** » Thu Mar 18, 2021 7:45 pm

https://www.demon-tweeks.com/uk/lma-wat ... rs-244340/

any use ??

Post by **Stanmo** » Thu Mar 18, 2021 7:58 pm

Cheers stuupnorth, that could be the one.

Post by **alloriginal1owner** » Mon May 24, 2021 7:06 pm

Stanmo wrote: ↑Thu Mar 18, 2021 7:58 pm Cheers stuupnorth, that could be the one.

Does ist work? And is this the same one?: https://www.demon-tweeks.com/uk/lma-wat ... rs-244340/

I have the same problem and I'm not sure about the correct adaptor. Can anybody help, please.

Post by **jagnut66** » Tue May 25, 2021 11:14 pm

Hi,
Is this for a water temperature gauge or an oil temperature gauge?
Best wishes,
Mike.

Post by **alloriginal1owner** » Wed May 26, 2021 6:03 am

jagnut66 wrote: ↑Tue May 25, 2021 11:14 pm Hi,
Is this for a water temperature gauge or an oil temperature gauge?
Best wishes,
Mike.

For water, of course. It fits to a cylinder head of an MGB, but not to the one of my Morris Minor's 948cc.

Post by **jagnut66** » Wed May 26, 2021 9:41 am

For water, of course.

It was a serious inquiry, as there is such a thing as an oil temp gauge, see attached link.
So no need for your snotty reply.
I was only interested in helping..........
https://www.merlinmotorsport.co.uk/p/sm ... eter-cb-ot

Post by **alloriginal1owner** » Wed May 26, 2021 1:02 pm

Sorry, I didn’t mean to be snotty.

Post by **MorrisJohn** » Mon May 31, 2021 4:19 pm

This is the TE5 adaptor I bought and put into my block, in place of the blanking plug. This is what you’re looking for I think -

https://www.minispares.com/product/Clas ... CBack%20to

Post by **alloriginal1owner** » Mon May 31, 2021 8:51 pm

MorrisJohn wrote: ↑Mon May 31, 2021 4:19 pm This is the TE5 adaptor I bought and put into my block, in place of the blanking plug. This is what you’re looking for I think -

https://www.minispares.com/product/Clas ... CBack%20to

Thank you! A week ago I ordered this one: https://www.holden.co.uk/p/adaptor_5_8_ ... _070_017?s I'm not sure, if it's the same one that you recommended. Now I'm just waiting for delivery to Hamburg in Germany that may take a few days longer after Brexit. If it won't fit, I will try yours.

Post by **MorrisJohn** » Tue Jun 01, 2021 8:41 am

What you’ve ordered looks right to me. Good luck.

Morris Minor Owners Club

Temperature sender adapter

Temperature sender adapter

Re: Temperature sender adapter

Re: Temperature sender adapter

Re: Temperature sender adapter

Re: Temperature sender adapter

Re: Temperature sender adapter

Re: Temperature sender adapter

Re: Temperature sender adapter

Re: Temperature sender adapter

Re: Temperature sender adapter

Re: Temperature sender adapter