Bleeding
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 2538
- Joined: Tue Jan 29, 2013 10:32 pm
- Location: Kernow
- MMOC Member: Yes
Bleeding
Quick question peeps - How many downward strokes of the brake pedal would be enough to clear the longest line (master to rear nearside) of old fluid? I'm thinking of using a one-way valve on the tubing so I can do this on my own. Also it would be helpful to know how many pumps before you need to top up the master again to continue? Thanks.
-
- Minor Legend
- Posts: 1666
- Joined: Thu May 12, 2016 6:33 am
- MMOC Member: No
Re: Bleeding
Pi*Diameter squared of master cylinder*stroke, all divided by 4 is the volume of one stroke. Measure volume of master cylinder and divide the first into the latter (but allow for some leeway).
-
- Minor Legend
- Posts: 2775
- Joined: Mon Dec 12, 2011 7:20 pm
- Location: LANCASHIRE (paradise)
- MMOC Member: Yes
Re: Bleeding
Best to keep going until clean fluid without air comes out, keeping an eye on the master cylinder level. If it is the fluid you want to change, pump the majority of it out until the master cylinder is nearly empty, then fill it with fresh before bleeding all wheel cylinders. It is much better to have someone help by operating the pedal.
Re: Bleeding
Ummmm.... eh?oliver90owner wrote: ↑Sat Apr 03, 2021 1:15 pm Pi*Diameter squared of master cylinder*stroke, all divided by 4 is the volume of one stroke. Measure volume of master cylinder and divide the first into the latter (but allow for some leeway).
Mike Dean
MMOC Webmaster
MMOC Webmaster