Just wanted to remove wheel bearing castellated nut on l/h front. it is v.diffult to budge.Just want to check which way thread it is, before more bashing. Is it normal right hand thread, (loosen to left.) ? Im a bit confused that Morriss parts suppliers list both r/h and l/h threaded nuts, but no mention of that in Haynes manual.
please help.
l/h front wheel bearing retaining nut
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Newbie
- Posts: 2
- Joined: Wed Aug 19, 2020 1:48 pm
- MMOC Member: No
-
- Minor Legend
- Posts: 2765
- Joined: Tue Nov 11, 2014 9:41 am
- MMOC Member: No
Re: l/h front wheel bearing retaining nut
The LH side has a LH thread which works the opposite way to normal. Therefore you need to turn it to the right (clockwise) to undo it.
The factory workshop manual is much better than the Haynes one
The factory workshop manual is much better than the Haynes one
-
- Newbie
- Posts: 2
- Joined: Wed Aug 19, 2020 1:48 pm
- MMOC Member: No
Re: l/h front wheel bearing retaining nut
Thank you MM.