Bonnet ID
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Bonnet ID
has it got a Vshaped backend?
Does it fit right up to the doors or is there a gap?
Does it have Minor 1000, Morris Minor or holes for badges on on the side of the bonnet?
Meanwhile you have posted another photo, it is a 1956> Minor 1000 bonnet
Does it fit right up to the doors or is there a gap?
Does it have Minor 1000, Morris Minor or holes for badges on on the side of the bonnet?
Meanwhile you have posted another photo, it is a 1956> Minor 1000 bonnet
[sig]3580[/sig]
Re: Bonnet ID
From the profile of the rear edge, I'd say it's the later type bonnet, BUT, it's the not so common LCV version, (unless the holes for the side mouldings have been filled in).
Geoff
-
- Minor Addict
- Posts: 544
- Joined: Sat Oct 23, 2010 9:03 pm
- Location: Caerleon, Newport, South Wales
- MMOC Member: No
Re: Bonnet ID
Thank you Mike.
Spotted it on ebay and thought it may be of interest but could not quite work it out as badges are different and there does not appear to be any side mouldings.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... TQ:GB:1123
Spotted it on ebay and thought it may be of interest but could not quite work it out as badges are different and there does not appear to be any side mouldings.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... TQ:GB:1123
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No