I've just fitted the frames and glass in the doors of my 2-door saloon, in both cases they seem to wind up fine but stop about an inch from the top, what have I done wrong?
Thanks
My front windows don't shut
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 1550
- Joined: Tue Jul 24, 2007 8:35 pm
- Location: Northampton
- MMOC Member: No
My front windows don't shut
Andy W____________1961 2-door 948cc (Sidney)_____________1963 2-door 1275cc (Emily)_______
-
- Minor Maniac
- Posts: 5200
- Joined: Sat Oct 20, 2007 3:14 pm
- Location: Warwickshire
- MMOC Member: No
Re: My front windows don't shut
Check you haven't got a screws that are fouling the glass?
Another problem we had - we fitted the black window channel but found the black felt was proud at the top. You need to cut an oblong out of the felt to allow for the top of the frame (where it's screwed together top to side)
Hope this makes sense!
Another problem we had - we fitted the black window channel but found the black felt was proud at the top. You need to cut an oblong out of the felt to allow for the top of the frame (where it's screwed together top to side)
Hope this makes sense!
Lou Rocke
MMOC 43512
-
- Minor Legend
- Posts: 1550
- Joined: Tue Jul 24, 2007 8:35 pm
- Location: Northampton
- MMOC Member: No
Re: My front windows don't shut
Thanks Lou,
I cut a chunk of felt off each channel and all is well
I cut a chunk of felt off each channel and all is well
Andy W____________1961 2-door 948cc (Sidney)_____________1963 2-door 1275cc (Emily)_______