Someone has very kindly left their mark on Dodo's front wing
It's done through the primer to the metal - should I just fill in with some touch up I have until I get some professional care next in about 10 day's time?[frame][/frame]
Immediate patch for very deep scratch (to metal)
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Re: Immediate patch for very deep scratch (to metal)
Yes just get it covered up with a compatible paint.Not primer it absorbs moisture.Dab it in with a small paintbrush.If you only have paint in an aerosol spray some in the lid then brush it on.
-
- Minor Fan
- Posts: 449
- Joined: Sun Aug 17, 2014 5:46 pm
- Location: North Yorkshire
- MMOC Member: No
Re: Immediate patch for very deep scratch (to metal)
Was this a deliberate act? Looks like it, bas*^"ds
Cover it with grease out of your grease gun, this will keep oxygen out
Al
Cover it with grease out of your grease gun, this will keep oxygen out
Al
-
- Minor Maniac
- Posts: 5200
- Joined: Sat Oct 20, 2007 3:14 pm
- Location: Warwickshire
- MMOC Member: No
Re: Immediate patch for very deep scratch (to metal)
I wouldn't use grease. As above use a clean brush and cover all the bare metal with paint (celly) until you can get it professionally repaired.
Lou Rocke
MMOC 43512
Re: Immediate patch for very deep scratch (to metal)
I don't think it was malicious - but no one bothered to leave a note and it's not something you wouldn't have notice doing. Thanks all for the advice, I went to patch it with touch-up but found my pot had dried out and I don't have any thinners!
Re: Immediate patch for very deep scratch (to metal)
Just go to a motor shop and buy one of those small touch up plastic thingies witha brush in.As long as the colours similar.Will stop the rust till it gets done properly.
-
- Minor Legend
- Posts: 3773
- Joined: Wed Jul 14, 2010 10:53 am
- Location: South Manchester
- MMOC Member: Yes
Re: Immediate patch for very deep scratch (to metal)
Looks quite deep
Re: Immediate patch for very deep scratch (to metal)
wouldn't use grease. As above use a clean brush and cover all the bare metal with paint (celly) until you can get it professionally repaired.
________
http://www.mybraindumps.net/642-832.html
http://www.uni-giessen.de/
http://www.juniper.net/
http://www.uchicago.edu/
________
http://www.mybraindumps.net/642-832.html
http://www.uni-giessen.de/
http://www.juniper.net/
http://www.uchicago.edu/