Hi I've just taken off my left rear wing on my 67 minor to have some welding done to the rear Spring hanger, and it was so rusty some of the captive nuts came away from the inner wing! That said, does anyone know where I can get a rivnut tool and rivnuts that take 5/16 unf nuts to keep things original?
Many thanks
Richard
Rivnut tool
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 1565
- Joined: Fri Aug 05, 2011 9:53 pm
- Location: Leeds, West Yorkshire
- MMOC Member: No
Re: Rivnut tool
Google is your friend but I doubt you could get the rivnuts in English sizes, only metric. M8 would be nearest size.
Richard
Opinions are like people,everyone can be different.
Opinions are like people,everyone can be different.
Re: Rivnut tool
Hi thanks for replying, M8 riv tool and nuts are readily available at a reasonable price
Richard
Richard
Re: Rivnut tool
Is M8 a 13mm spanner? I think that's what I used!
“The car has become an article of dress without which we feel uncertain, unclad, and incomplete in the urban compound.” ― Marshall McLuhan
-
- Minor Addict
- Posts: 762
- Joined: Mon Jul 27, 2015 6:10 pm
- Location: Brompton Regis nrDulverton
- MMOC Member: No
Re: Rivnut tool
Yes 13 mm spanner fits m8.
Re: Rivnut tool
Hi solved the problem with the rivnuts., ordered a tool and some rivnuts and it works well, although looking on YouTube I saw someone had made a homemade one with an 8mm bolt, washer and nut, ant that worked a treat!! Amazing!
Richard
Richard
Re: Rivnut tool
[frame][/frame]
Did a neat enough job for me.
Did a neat enough job for me.
“The car has become an article of dress without which we feel uncertain, unclad, and incomplete in the urban compound.” ― Marshall McLuhan