Van seat belt mounts

[mowogg]

I am just putting the van back together but I cannot find any evidence of inner seat belt mounts Are these usually on the tunnel similar to saloons?

[les]

There should be holes in the floor pan that give you access to threaded plates fixed to the chassis. The belts bolt through to these plates.

[mowogg]

Thanks for the reply. Is this on the flat of floor behind thr seat?

I suspect this van may never have had belts fitted. I have found no evidence to suggest they have been.

[les]

Yes the holes are a few inches away from either side of the tunnel, on flat metal behind the seats, quite near the back panel. If you have a very early van the plates welded to the chassis may be about 8x2 inches in size, just big enough to accommodate securing bolts, whereas a later chassis will have a bigger plate to incorporate the seat belt fixings as well.