Not the first time I've seen a SII Engine Bay where the connections to the Starter Pull cross over like that.
Goes against my reasoning to cross cables over when installing, you'd think cables would connect to the nearest point, not the furthest.
My SII's battery was connected to the nearest connection when I got it, and has remained so.
But back on topic, I agree they should be parcel shelf fixing holes. My Parcel shelf has been welded in at some past restoration, but there are 2 holes in the shelf just where you indicate.
On the same restoration presumably, the welder went 'weld happy' and seemed to fill in lots of holes that were originally in the bulkhead. I've got no holes for sound proofing fixing etc.
- 20210922_145834.jpg (616.09 KiB) Viewed 1877 times