Advice on freeing stuck heater cable

Discuss other problems here.
Rob_Jennings
Minor Addict
Posts: 749
Joined: Fri Mar 24, 2006 11:33 am
MMOC Member: No

Advice on freeing stuck heater cable

Postby Rob_Jennings » Tue Jun 13, 2006 5:03 pm

It would be nice to have internal heater controls, but when they swapped for the 1275 engine they fitted the hand turn valve. and the long unused heater cable has frozen.

So, I've ordered a new control valve and understand I'll probably have to take a nibble out of the battery plate to fit it.

Any advice on how to free the cable? I assume remove it and lot of work with WD40 and a pair of pliers or somthing similar?
Rob
Lizzy 1970 Morris Minor Traveller and Noah 1969 Morris Mini Traveller
ImageImage

aupickup
Minor Maniac
Posts: 6005
Joined: Tue Jul 20, 2004 11:41 pm
MMOC Member: No

Postby aupickup » Tue Jun 13, 2006 5:49 pm

use some sort of plus gas to free the cable.
you can buy from esm an extended metal pipe that has a top and bottom flange that you put on the cylinder head first and then the heater valve.
brings it all clear of the battery shelf, i have one on my van

minor_hickup
Minor Legend
Posts: 1101
Joined: Wed Apr 20, 2005 8:27 pm
MMOC Member: No

Postby minor_hickup » Fri Jun 16, 2006 10:54 pm

If its the old style cable that has wound metal around the cable and not the plastic, you can just spray plus gas onto the outer sheath and let it soak through.

bigginger
Minor Maniac
Posts: 5929
Joined: Thu Sep 09, 2004 11:01 pm
MMOC Member: No

Postby bigginger » Sat Jun 17, 2006 1:21 am

The old tip was to make a sort of cup out of plasticene at the end of the cable, and fill it with 3 in 1, allowing it to trickle down the cable.


Who is online

Users browsing this forum: No registered users and 2 guests