HEATHER FACIA PLATE DECALS

Discuss other problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
BIGRAB
Minor Friendly
Posts: 46
Joined: Sat Jan 07, 2017 8:37 pm
MMOC Member: No

HEATHER FACIA PLATE DECALS

Post by BIGRAB »

My interior heater facia plate (1966 model) tatty with light rust etc.

An easy spray paint job but I will lose the decals for the position of the heater selector lever (screen etc).

Does anyone produce the decals, looked online but couldn't see anything.

Regards
BTU268F
Minor Friendly
Posts: 26
Joined: Mon May 02, 2011 2:28 pm
MMOC Member: No

Re: HEATHER FACIA PLATE DECALS

Post by BTU268F »

Sticky fingers produce a replacement sticker for the heater front plate, great job
irmscher
Minor Legend
Posts: 3773
Joined: Wed Jul 14, 2010 10:53 am
Location: South Manchester
MMOC Member: Yes

Re: HEATHER FACIA PLATE DECALS

Post by irmscher »

You can buy a full heater front cover off ebay very cheaply
Declan_Burns
Minor Legend
Posts: 1956
Joined: Wed Apr 18, 2007 7:32 am
Location: Düsseldorf, Germany
MMOC Member: No

Re: HEATHER FACIA PLATE DECALS

Post by Declan_Burns »

When I restored my heater I made the graphics myself. I still have a few sets if anybody needs them in 3 and 4mm as a rub on transfer. I think the originals were 3mm and I only have a few but I could have more made. They will require a coat of clear lacquer or they will of course rub off again.

Regards
Declan
Attachments
Facia_plate.jpg
Facia_plate.jpg (156.24 KiB) Viewed 2774 times


Regards
Declan
Declan_Burns
Minor Legend
Posts: 1956
Joined: Wed Apr 18, 2007 7:32 am
Location: Düsseldorf, Germany
MMOC Member: No

Re: HEATHER FACIA PLATE DECALS

Post by Declan_Burns »

BTU268F wrote:Sticky fingers produce a replacement sticker for the heater front plate, great job
http://martincull.create.net/ourshop/pr ... ascia.html
They don't look bad at all but mine are free of cost!
Regards
Declan


Regards
Declan
austerdriver
Minor Friendly
Posts: 28
Joined: Sun Aug 03, 2014 9:46 am
Location: Devon
MMOC Member: No

Re: HEATHER FACIA PLATE DECALS

Post by austerdriver »

Pm sent
BIGRAB
Minor Friendly
Posts: 46
Joined: Sat Jan 07, 2017 8:37 pm
MMOC Member: No

Re: HEATHER FACIA PLATE DECALS

Post by BIGRAB »

No PM has arrrived
BIGRAB
Minor Friendly
Posts: 46
Joined: Sat Jan 07, 2017 8:37 pm
MMOC Member: No

Re: HEATHER FACIA PLATE DECALS

Post by BIGRAB »

When trying to remove the plate, unscrewed the two visible screws but plate seemed to be held by something at the top up and under the dash.

Am I missing something ?

Regards
LouiseM
Moderator
Moderator
Posts: 4417
Joined: Sat Jan 08, 2005 5:11 pm
Location: London
MMOC Member: No

Re: HEATHER FACIA PLATE DECALS

Post by LouiseM »

There's a third screw at the top which is s real b****r to get out! The one on mine was a bit loose so I managed to get the facia plate off with a bit of wiggling. It got slightly dented but as I was taking it out to replace it with a better one it wasn't an issue. Hopefully someone here will know a simple, easy way to remove the top screw which doesn't involve removing the heater. Good luck!


Eric - 1971 Traveller
greendefender123
Minor Addict
Posts: 762
Joined: Mon Jul 27, 2015 6:10 pm
Location: Brompton Regis nrDulverton
MMOC Member: No

Re: HEATHER FACIA PLATE DECALS

Post by greendefender123 »

I just fell for the hidden 3rd screw aswell :roll: I undone the 2 visible screws and was expecting it drop down. Il leave it for a job for another day.
Post Reply