Page 1 of 1
Bump stop to body clearannce
Posted: Sat Feb 10, 2018 10:21 am
by MichaelBeck
Hi
Can anyone tell me the proper clearance from the top of the rear axle bump stop to the body?
Mine looks low but its been so long I don't remember what it looked like.
Thanks
Re: Bump stop to body clearannce
Posted: Sat Feb 10, 2018 4:01 pm
by philthehill
The body to ground level at specific points are the measurement to take.
Measure as per the diagram below:-
The distance between top of the bump stop and the chassis bump stop plate can vary and may not be to factory specification.
You should aim for the distances quoted in the diagram if you want it right.
Re: Bump stop to body clearannce
Posted: Sat Feb 10, 2018 8:15 pm
by MichaelBeck
That's fantastic. Thank You
Re: Bump stop to body clearannce
Posted: Sat Feb 10, 2018 8:16 pm
by MichaelBeck
Where is that diagram from?
Re: Bump stop to body clearannce
Posted: Sat Feb 10, 2018 8:40 pm
by philthehill
BMC Morris Minor Wksp Manual - AKD 530 L - Section R - illustration No: R16.
Re: Bump stop to body clearannce
Posted: Mon Feb 12, 2018 8:47 pm
by Andy W
philthehill wrote:BMC Morris Minor Wksp Manual - AKD 530 L - Section R - illustration No: R16.
Phil, could you try to be a bit more specific please?
