Saloon interior 67

Discuss other problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
alawrence10360
Minor Fan
Posts: 403
Joined: Thu Jan 31, 2019 5:54 pm
MMOC Member: Yes

Saloon interior 67

Post by alawrence10360 »

My vinyl seats have a panel in the centre with embossed vertical lines
Is this standard ?
I’ve seen the same thing on the Newton website but I’m trying to get some leather replacements from EBay and the supplier says they should go from top to bottom on the back
alawrence10360
Minor Fan
Posts: 403
Joined: Thu Jan 31, 2019 5:54 pm
MMOC Member: Yes

Re: Saloon interior 67

Post by alawrence10360 »

alawrence10360 wrote: Wed Feb 19, 2020 9:53 pm My vinyl seats have a panel in the centre with embossed vertical lines
Is this standard ?
I’ve seen the same thing on the Newton website but I’m trying to get some leather replacements from EBay and the supplier says they should go from top to bottom on the back
User avatar
geoberni
Minor Legend
Posts: 3565
Joined: Fri Aug 04, 2017 11:19 am
Location: North Leicestershire
MMOC Member: Yes

Re: Saloon interior 67

Post by geoberni »

Ummmm... :-?

Quoting yourself...???????
Basil the 1955 series II

Image
alawrence10360
Minor Fan
Posts: 403
Joined: Thu Jan 31, 2019 5:54 pm
MMOC Member: Yes

Re: Saloon interior 67

Post by alawrence10360 »

geoberni wrote: Wed Feb 19, 2020 10:40 pm Ummmm... :-?

Quoting yourself...???????
Thanks for the feedback
User avatar
geoberni
Minor Legend
Posts: 3565
Joined: Fri Aug 04, 2017 11:19 am
Location: North Leicestershire
MMOC Member: Yes

Re: Saloon interior 67

Post by geoberni »

Well I was wondering if you had intended to quote yourself and add something else.... or if the site is having more Gremlins..... I see we've still got the multiple post thing going on..... :evil:


I reported the duplicate and it has been removed
:wink:
Last edited by geoberni on Thu Feb 20, 2020 12:41 pm, edited 1 time in total.
Basil the 1955 series II

Image
ManyMinors
Minor Legend
Posts: 2752
Joined: Tue Nov 11, 2014 9:41 am
MMOC Member: No

Re: Saloon interior 67

Post by ManyMinors »

For a 1967 car, the panel in the centre with the embossed lines (heatformed in the vinyl) is correct. The Newton website should give you a reliable guide. You cannot heatform leather, so if you want a leather interior it will have to be done differently. There is an ebay seller of interiors who claims to be in the UK but seemingly is not. A friend ordered a complete interior from them and it came from the continent (after a very long wait) and was of poor quality. He felt that the money saved was not worthwhile and much of it didn't fit. Others may be more fortunate?
Newton Commercial are very established and although more expensive, their products are good. It might also be worth asking about local trimmers in your area?
alawrence10360
Minor Fan
Posts: 403
Joined: Thu Jan 31, 2019 5:54 pm
MMOC Member: Yes

Re: Saloon interior 67

Post by alawrence10360 »

Thanks
I need to change my 2 complete front seat covers and you can get a leather set for £300 for the pair
However they wouldn’t quite match the rear seat as the lines go from top to bottom
I could change the rear as well I suppose but would be a bit pricey for no real benefit
I think I will go for Newton as they are guaranteed to fit
Thanks for that
Post Reply