I’m going to be changing the steering wheel and horn push on my ‘68 Minor to the earlier banjo type with the chrome spokes.
I’ve sourced a wheel and it’s not cracked, but it does want repainting.
Can anyone tell me what type of paint to use and how it should be applied?
Painting steering wheel
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 721
- Joined: Sun Jun 21, 2015 9:41 am
- Location: Glasgow
- MMOC Member: Yes
-
- Minor Legend
- Posts: 2765
- Joined: Tue Nov 11, 2014 9:41 am
- MMOC Member: No
Re: Painting steering wheel
I repainted the wheel on one of my cars a few years ago. It has lasted well. All this was done with the wheel removed from the car of course! First, I rubbed the plastic coated rim down very thoroughly using 800grit wet/dry paper and soapy water. Next, I dried it off and masked everything I didn't want painted. Then I sprayed several light coats of a high build etch primer and, once that was dry, rubbed it down again and sprayed on a few coats of gloss black top coat. I left this to harden for a few days and then polished it with a rubbing compound which removed the rather over glossy appearance. The finish has remained very authentic ever since.
I carried out all the spray painting using a spray gun because I have one. However I imagine that the same could be achieved using spray cans.
Another tip: A steering wheel is not the easiest item to spray. I acquired an old spare steering column which I clamped to my workmate. I then attached the wheel to that. This made the job much easier
I carried out all the spray painting using a spray gun because I have one. However I imagine that the same could be achieved using spray cans.
Another tip: A steering wheel is not the easiest item to spray. I acquired an old spare steering column which I clamped to my workmate. I then attached the wheel to that. This made the job much easier
Re: Painting steering wheel
Think these are the people I got a quote from for restoring mine professionally:MorrisJohn wrote: ↑Fri Oct 08, 2021 6:01 pm Can anyone tell me what type of paint to use and how it should be applied?
https://www.steeringwheelrefurbishment. ... ing-wheels
If they are the people, the quote was £250.
There's also this DIY page which includes the painting process and basically is a picture version of ManyMinors information above that I had found while trying to work out how to restore my own one after thinking the quote was a little too much for my pockets:
https://www.tinshackrestoration.com/201 ... storation/
Small point, apparently the Banjo wheels are likely to be a composite containing asbestos, just as a word of caution if you sand it.
In my own instance I found a near-perfect wheel on eBay that was probably cheaper than buying the paint so bought it, my own cars original wheel is so pitted it's a greenish-grey now.
[img]download/file.php?avatar=1401_1646150056.jpg[/img]
-
- Minor Addict
- Posts: 721
- Joined: Sun Jun 21, 2015 9:41 am
- Location: Glasgow
- MMOC Member: Yes
Re: Painting steering wheel
Thanks very much for the advice gents, very helpful.
-
- Minor Legend
- Posts: 3635
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Re: Painting steering wheel
One key point to pick up from above, is the advice to 'let it harden' before cutting back, polishing etc.
Personally I leave mine for a week, at least.
Best wishes,
Mike.
Personally I leave mine for a week, at least.
Best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)