56 split screen project

You can use this area to advertise a Morris Minor.

Moderator: Moderators

Minor Fan
Posts: 485
Joined: Sun May 29, 2011 7:29 pm
MMOC Member: No

56 split screen project

Postby westy24 » Sat Nov 24, 2018 6:13 pm

Hi all , you may have seen my post on “ Barrie’s project “ ,
Sadly I am unable to continue with the moggy , and is now for sale,
The body has had a lot of work done by myself , including ...
Two front chassis legs
Both floor pans
Sills complete
Flitch panels and complete front end
Rear leg replacement
Boot floor
Rear arches doors repaired and painted
Bootlid repaired and painted
Bonnet repaired and painted
Engine bay primed sealed and painted
2 thirds of the underside is primed and sealed and painted .
New steering rack fitted with new everything
Front suspension fitted to car with all new bushes and fixings ,bearings ,tie bars, adjusters ( one upright needed as the original was damaged but have new trunnion ready
What needs to be done to complete the shell includes....
New door hinges needed to fit doors ( I have new bolts)
Left gutter rail needs fitting but included in sale
A new back panel needs to be fitted ( struggled to get what I bought to fit )
Lower quarter panel repair section ( included )

Mechanical parts ready to fit are
Front brakes need fitting but are included
Rear suspension ready to fit ( all new including leaf springs ,bushes, bearings ,shackles ,fixings gaskets ,breather and complete brake overhaul including pipes.all of this looks like new.i could possibly fit to car if needed .
Gear box cleaned and painted ( worked fine in car when removed)
Prop cleaned ,new joints and painted with new fixings
Engine is striped ,cleaned and boxed up ready to build up ( 948cc engine bored to +40 and include new pistons and rings ( may need bearings but seem fine.)
All new gaskets and seals ,water pump ,sump fixings and some engine fixings ( possibly have all of them ,but not to sure!
948cc carb and manifold need refurb.
All new brake pipes and lock head master cylinder
Parts inside the car that iv done are
All seat frames repaired and painted
Hand brake refurbished
Steering column painted cream
Steering wheel refurbished
All peddles are painted Exept accelerator.

Things you’ll need
Rear suspension dampers ( but have old ones )
Right front upright
Door hinges
Wheels tyres
Rear panel
Full interior
Wiring loom and fuse box
A few ancillaries for engine
Window rubbers
Rad and pipes
Fuel tank and pipes
Front wings ( as I may sell separate as they are the expensive ones)
Maybe a few other things

Also iv refurbished the horn which works ,front grill complete with chrome ,all new .
Heater vents and heater all painted

Any questions please ask , I’m not sure on price , as iv done a lot of the hard work and spent ££££ on it ,I know I won’t get it all back .please feel free to look at my post on restoration section under “ Barrie’s project “ on here .
Thank you for your time feel free to pm me and il get back to you as soon as possible.

Who is online

Users browsing this forum: somerset and 1 guest