What inlet manifold is this?

[chrisryder]

As the subject suggests... i found this inlet manifold but i'm not sure what it's off (and therefore if it's any good). Could it be the fabled MG one?
[frame][/frame]
As you can see, it's got locating rings.
[frame][/frame]
looks like it's big enough for a HIF44, didn't have a ruler on me to measure.
[frame][/frame]
The part number cast into it looks like 8CSM-ACR.

Any help much appreciated, cheers!

[8009STEVE]

Follow the link scroll down and you will see the manifold
http://fairthorpe.blogspot.com/2011_03_01_archive.html

[chrisryder]

thanks steve, doesn't look like the same one though.

I've been told on another forum that it is indeed an MG Metro one

[welshrat]

SNAP! I have also had one of these sat in my shed for many years and was unsure what it was. Part number is BC & M-A/CR, tell me about the " fabled MG one", not heard anything about this.[frame][/frame][frame][/frame]

[charlie_morris_minor]

it looks like the one i took off an mg metro..

[don58van]

Hello welshrat

Are you interested in selling your manifold? I am in Australia.

Cheers
Don

[AlanSills]

Hi

The Manifold shown is for a Metro fitted to 1275 A Series Engines
Manifold is water heated
would need seperate exhaust manifold

I am using a branch lcmnifold with this type of manifold

it can be fitted with a HIF38 or HIF44
Alan

[chrisryder]

it'll be going onto a 1275 with a HIF44 and an LCB manifold, so it should work a treat!

Thanks for all the responses!