1098 inlet -exhaust manifold colour(s)
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 457
- Joined: Mon Jun 15, 2009 1:45 am
- Location: Manchester
- MMOC Member: Yes
1098 inlet -exhaust manifold colour(s)
what colour should the exhaust inlet manifold be, i belive the inlet part is engine green, what about the exhaust part.... silver or black??
-
- Minor Friendly
- Posts: 14
- Joined: Thu Jan 14, 2010 1:47 pm
- MMOC Member: No
Re: 1098 inlet -exhaust manifold colour(s)
Hi Paul
The exhaust colour should be satin black, using a good quality heat resistant paint. VHT satin black is OK as is Eastwoods Black Velvet, this is an American company and their products can be purchased through the Frost company, it is more expensive, but, if applied correct on to a good clean rust free surface it will last for years, we have had it on our vehicle for the last 6 years and it still is as good as the day we did it.
Regards
Chrisrickmts
The exhaust colour should be satin black, using a good quality heat resistant paint. VHT satin black is OK as is Eastwoods Black Velvet, this is an American company and their products can be purchased through the Frost company, it is more expensive, but, if applied correct on to a good clean rust free surface it will last for years, we have had it on our vehicle for the last 6 years and it still is as good as the day we did it.
Regards
Chrisrickmts
-
- Minor Maniac
- Posts: 7845
- Joined: Thu Jan 25, 2007 3:18 pm
- Location: South East London
- MMOC Member: No
Re: 1098 inlet -exhaust manifold colour(s)
Ferrous oxide brown is very popular too!
"Once you break something you will see how it was put together"
-
- Minor Legend
- Posts: 2775
- Joined: Mon Dec 12, 2011 7:20 pm
- Location: LANCASHIRE (paradise)
- MMOC Member: Yes
Re: 1098 inlet -exhaust manifold colour(s)
These were never painted in the factory.
-
- Minor Friendly
- Posts: 37
- Joined: Mon Nov 15, 2010 11:36 am
- Location: Surrey
- MMOC Member: No
Re: 1098 inlet -exhaust manifold colour(s)
That's the finish I went for!MarkyB wrote:Ferrous oxide brown is very popular too!
Est ursus catholica?
Defecatein papa silvis?
Defecatein papa silvis?