Thread sizes

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
hdavy
Minor Fan
Posts: 114
Joined: Mon Jun 30, 2008 10:10 am
MMOC Member: No

Thread sizes

Post by hdavy »

There are plenty of lists which tell you the spanner sizes for most items but do any tell one what thread they are?
philthehill
Minor Maniac
Posts: 10767
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Thread sizes

Post by philthehill »

Most engine/transmission parts have UNF threads the rest have BSF threads but recently there has been a tendency for new parts to be given UNF threads. There a few BA threads mainly on the bright work.

bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Thread sizes

Post by bmcecosse »

Which thread do you need to know...?
ImageImage
Image
Tudge
Minor Fan
Posts: 104
Joined: Thu Jun 06, 2013 10:08 pm
Location: Herefordshire, West Midlands
MMOC Member: No

Re: Thread sizes

Post by Tudge »

Where are these lists you talk of?! It would be super helpful if you could post up a link of the spanner sizes of screws please! And you are right, a full list of thread types and size of screws for a moggy would be really useful... Is there a way we could start a list on this forum, and then have it added to whenever anyone knows a screw type/size?
1965 2Dr - She's called Lola

bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Thread sizes

Post by bmcecosse »

Right at the top of this section 'bigginger' made a list for you........ :roll:
ImageImage
Image
Tudge
Minor Fan
Posts: 104
Joined: Thu Jun 06, 2013 10:08 pm
Location: Herefordshire, West Midlands
MMOC Member: No

Re: Thread sizes

Post by Tudge »

Our prayers have been answered! Better get on fleabay to find a load of whitworth & AF spanners!
1965 2Dr - She's called Lola

philthehill
Minor Maniac
Posts: 10767
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Thread sizes

Post by philthehill »

Whilst 'bigginer' has kindly listed the spanner sizes the list does not include the thread sizes i.e. Rocker Cover nuts which are 5/8" A/F spanner size and which have a thread size of 5/16" x 24 TPI UNF and cylinder head studs which are 9/16" spanner size and which have a thread size of 3/8" x 24 TPI UNF and the list goes on.

Tudge
Minor Fan
Posts: 104
Joined: Thu Jun 06, 2013 10:08 pm
Location: Herefordshire, West Midlands
MMOC Member: No

Re: Thread sizes

Post by Tudge »

No, but it's a start!
1965 2Dr - She's called Lola

IslipMinor
Minor Legend
Posts: 2147
Joined: Mon May 10, 2004 9:10 pm
Location: Oxford, UK
MMOC Member: Yes

Re: Thread sizes

Post by IslipMinor »

Here's a starter for 10 with thread size and spanner size in the same table (and the torque where it is in the BMC Workshop Manual). There are 3 missing that I do not know at all (thread or spanner) without dismantling things:

The master cylinder cap
The differential retaining cap nuts
Track rod ends to track rod

There are also a few thread sizes missing, but the spanner sizes are there.

Please note on both front and rear suspension replacement parts, they can have a UNF thread instead of the original BSF.
Thread and Spanner Sizes Pt1-5 v4.jpg
Thread and Spanner Sizes Pt1-5 v4.jpg (171.18 KiB) Viewed 28664 times
Thread and Spanner Sizes Pt2-5 v4.jpg
Thread and Spanner Sizes Pt2-5 v4.jpg (122.36 KiB) Viewed 28664 times
Thread and Spanner Sizes Pt3-5 v4.jpg
Thread and Spanner Sizes Pt3-5 v4.jpg (152.96 KiB) Viewed 28664 times
Thread and Spanner Sizes Pt4-5 v5.jpg
Thread and Spanner Sizes Pt4-5 v5.jpg (166.48 KiB) Viewed 26539 times
The list is for Series II and Minor 1000 - I have no detailed knowledge of the MM, so will leave that to someone who does!

Comments, changes, additions please!
Last edited by IslipMinor on Tue Apr 10, 2018 10:18 am, edited 14 times in total.
Richard


Tudge
Minor Fan
Posts: 104
Joined: Thu Jun 06, 2013 10:08 pm
Location: Herefordshire, West Midlands
MMOC Member: No

Re: Thread sizes

Post by Tudge »

Great work Richard, thanks! Is that every bolt & nut in a moggy?! Just missing all the small screws and things...?
1965 2Dr - She's called Lola

bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Thread sizes

Post by bmcecosse »

Well done Richard! Must have been a quiet day.... :)
ImageImage
Image
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Thread sizes

Post by mike.perry »

It is no good relying on a list for thread sizes, during production nut and bolt sizes were changed and during a 40 to 60 year life span previous owners will have fitted whatever was available. There are also special sizes where the thread size does not match the spanner size, for instance Series MM engines had metric threads and Whitworth spanner size bolt heads. Thread pitches can be useful but most people would probably not know the relationship between a 20 tpi and a 24 tpi thread.
The best solution is to buy a good set of spanners and sockets. A full set of open enders and some ring or combination spanners as required. A set of combination spanners on its own is no good as a nut and bolt has two ends and a combination spanner has the same size on both ends. A set of A/F spanners from 3/8 to 1 in and 1/4 to 7/16 Whitworth should cover most of your needs. If you have not got a tool don't borrow it, buy it, then you build up your collection and you have the tool for next time.
Now to study Richard's comprehensive list
Last edited by mike.perry on Tue Sep 03, 2013 6:36 pm, edited 2 times in total.
[sig]3580[/sig]
MarkyB
Minor Maniac
Posts: 7845
Joined: Thu Jan 25, 2007 3:18 pm
Location: South East London
MMOC Member: No

Re: Thread sizes

Post by MarkyB »

Is there a solution to getting it READABLE?
Highlight the contents of the spreadsheet, right click, copy, paste into the thread.
Then it will just be text and as readable as the thread itself.

"Once you break something you will see how it was put together"
IslipMinor
Minor Legend
Posts: 2147
Joined: Mon May 10, 2004 9:10 pm
Location: Oxford, UK
MMOC Member: Yes

Re: Thread sizes

Post by IslipMinor »

Doing that loses all the formatting and alignment. What I have actually uploaded is a jpeg file of the Excel cells, but for whatever reason, the forum forces the size back to what you see.

Found a work around - reduce the Excel font back to 10, split the spreadsheet cells into 4 groups, create a jpeg for each group and upload them separately. The picture is displayed as the same size as before, but contains less cells so each one is now readable. Previous posting has been updated with this.
Last edited by IslipMinor on Tue Sep 03, 2013 10:54 am, edited 1 time in total.
Richard


Tudge
Minor Fan
Posts: 104
Joined: Thu Jun 06, 2013 10:08 pm
Location: Herefordshire, West Midlands
MMOC Member: No

Re: Thread sizes

Post by Tudge »

Mike.Perry, a very good point, I'll be buying a set of spanners soon... But the list still has its uses - I will be using it to know what nuts and bolts should be there, as opposed to what are actually there. It means I can replace with the correct nuts & bolts.

Now we just need a list of every screw!
1965 2Dr - She's called Lola

LouiseM
Moderator
Moderator
Posts: 4417
Joined: Sat Jan 08, 2005 5:11 pm
Location: London
MMOC Member: No

Re: Thread sizes

Post by LouiseM »

A useful thread (excuse the pun!). Well done Richard - I'll make this a 'sticky' :D


Eric - 1971 Traveller
philthehill
Minor Maniac
Posts: 10767
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Thread sizes

Post by philthehill »

Richard
Many thanks for the list but what has happened to the list for the front suspension or am I not seeing it?
Rear axle & suspension on the list twice but no reference to front suspension!
Phil

IslipMinor
Minor Legend
Posts: 2147
Joined: Mon May 10, 2004 9:10 pm
Location: Oxford, UK
MMOC Member: Yes

Re: Thread sizes

Post by IslipMinor »

Hi Phil,

Good job someone's on the ball! Obviously not me.

Previous post now corrected - thanks.
Richard


philthehill
Minor Maniac
Posts: 10767
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Thread sizes

Post by philthehill »

Richard
A couple of details for your spread sheet.
1. The sump plug is 1/2" x 20 TPI UNF.
2. The starter dog thread is 5/8" (15.68mm) x 16TPI (1.75mm). I cannot cross reference in my ZEUS data chart, 5/8" dia threads quoted are either 14 or 18TPI. 5/8" UNF is 18 TPI. I have also tried equivalent metric sizes and still no go. Must be one of those strange/special ISO metric threads? I will look into this further and come back if I find anything.
3. The oil pressure relief valve cover is 13/16" x 14TPI. Again I have been unable to cross reference from the ZEUS data chart. Again strange/special ISO metric thread?
4. The oil pipe banjo nut is 5/8" x 18TPI UNF.
Phil
Last edited by philthehill on Thu Sep 05, 2013 1:25 pm, edited 2 times in total.

IslipMinor
Minor Legend
Posts: 2147
Joined: Mon May 10, 2004 9:10 pm
Location: Oxford, UK
MMOC Member: Yes

Re: Thread sizes

Post by IslipMinor »

Phil,

Thanks.

Haven't been able to check the sump plug - engine has oil in it! As has the spare block. Looks like a standard 1/2" UNF then?

Crankshaft front bolt/starter dog is 5/8" x 16TPI, so I would think a 'special' Unified pitch?

The oil pressure relief valve is slightly bigger than 13/16", the one from my spare block measures around 0.824", so that fits nicely with 1/2" BSP, which is 0.825" x 14TPI. I suppose makes sense for an 'oil fitting'?

One more is the banjo bolt for the oil feed to the filter, which is 5/8" UNF.

Have updated the spreadsheet and also the previous posting with all the above.
Richard


Post Reply