Does anybody know where I can get the rubber sealing ring for the series mm oil filter.
Regards
BrianR
OIL FILTER SEALING RING
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 180
- Joined: Wed Aug 10, 2011 3:52 pm
- Location: Pembrokeshire
- MMOC Member: Yes
-
- Minor Legend
- Posts: 1438
- Joined: Tue Jan 30, 2007 10:09 pm
- Location: Essex
- MMOC Member: No
Re: OIL FILTER SEALING RING
Usually come with the filter, might be worth getting another filter for the sealing ring. In the past I have left the old one in, I have never had a leak from there.
Alan
Alan
-
- Minor Maniac
- Posts: 10816
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: OIL FILTER SEALING RING
May be worth considering a spip on/off filter conversion.
I am pretty certain the filter head on the Massey Ferguson is suitable - see links below.
https://www.ebay.co.uk/itm/Massey-Fergu ... SwwzhZQ-xk
https://www.ebay.co.uk/itm/Massey-Fergu ... Sw-ndTmzWF
I am pretty certain the filter head on the Massey Ferguson is suitable - see links below.
https://www.ebay.co.uk/itm/Massey-Fergu ... SwwzhZQ-xk
https://www.ebay.co.uk/itm/Massey-Fergu ... Sw-ndTmzWF
-
- Minor Legend
- Posts: 2646
- Joined: Thu May 11, 2006 10:34 am
- Location: Cardiff
- MMOC Member: Yes
Re: OIL FILTER SEALING RING
The bolts in that kit will be no good, though.
I've got a filter head on order for £10.80 to try.
I've got a filter head on order for £10.80 to try.
Cardiff, UK
-
- Minor Legend
- Posts: 2646
- Joined: Thu May 11, 2006 10:34 am
- Location: Cardiff
- MMOC Member: Yes
Re: OIL FILTER SEALING RING
Fits alright. Just need to sort out a short filter. Probably a 1275 Midget one will do.
Cardiff, UK
Re: OIL FILTER SEALING RING
One thing I've learned is to resist the temptation to spin the outer casing up tight against the seal, rather than using the bolt (which can fit quite tightly to the case). Spinning the case applies a shearing force to the big seal, and can easily tear or distort it. Result: a leak.
Incidentally I've found a safety pin the best tool for removing the old seal.
Incidentally I've found a safety pin the best tool for removing the old seal.