Lower trunion to swivel pin
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 51
- Joined: Tue Aug 11, 2015 10:40 pm
- MMOC Member: No
Lower trunion to swivel pin
Can anybody shed some light on this subject as I'm stuck, I got the lower trunion to swivel pin on first time, to do this I had to remove the threaded pin which fits which the bushes in the trunion, when putting it back in the swivel became real tight and wouldn't move at all. I had to disassemble it all, now the trunion won't go on. Any way around this, what do I do?
- Attachments
-
- 20180902_122205.jpg (3.68 MiB) Viewed 1649 times
-
- Minor Maniac
- Posts: 10816
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Lower trunion to swivel pin
The trunnion pin will not go through the bottom trunnion until it has been screwed sufficiently up the swivel so as to fit through the waisted part of the swivel.
You should be able to turn the trunnion on the swivel 180 degrees either way without the trunnion pin contacting the swivel threads
Make sure that the grease deflector tube (if fitted) between the trunnion pin bushes is moved out of the way of the swivel threads and when the trunnion is fitted aligned with both of the trunnion pin bushes otherwise the trunnion pin will not go through.
You should be able to turn the trunnion on the swivel 180 degrees either way without the trunnion pin contacting the swivel threads
Make sure that the grease deflector tube (if fitted) between the trunnion pin bushes is moved out of the way of the swivel threads and when the trunnion is fitted aligned with both of the trunnion pin bushes otherwise the trunnion pin will not go through.
-
- Minor Addict
- Posts: 667
- Joined: Sun Aug 27, 2017 6:05 pm
- Location: West Yorkshire
- MMOC Member: Yes
Re: Lower trunion to swivel pin
There looks to be some dirt in the threads that are visible.
I would take it all apart again and make sure it is spotlessly clean before trying again.
Also have a look for any burrs on the threads.
Phil
I would take it all apart again and make sure it is spotlessly clean before trying again.
Also have a look for any burrs on the threads.
Phil
-
- Minor Friendly
- Posts: 51
- Joined: Tue Aug 11, 2015 10:40 pm
- MMOC Member: No
Re: Lower trunion to swivel pin
It's all together now, feels alittle stiff but it's turning as should? This was an example photo, they were cleaned and grease up upon assemble.
-
- Minor Addict
- Posts: 621
- Joined: Wed Sep 05, 2012 9:32 pm
- Location: East Yorkshire
- MMOC Member: Yes
Re: Lower trunion to swivel pin
Did any one notice the trunion pin shown has threads of equal length as against original has the back one shorter.
-
- Minor Maniac
- Posts: 10816
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Lower trunion to swivel pin
Whilst the original BMC had unequal length threaded pins to compensate for the different thickness of the two suspension arms some pins currently produced have threaded pins of equal length so there is nothing untoward or of concern in having the lower trunnion pin with equal length threaded pins provided that the pin is fully fitted through the nut once fitted.
Another sign that the trunnion pin is not original is that it has UNF threads and not the original BSF threads.
The best trunnion pins for fitting to a Minor are those from the Marina as they are surface hardened and the production finish is superior to the original Minor specification. They are near identical to the original Minor trunnion pins but have UNF threads.
Another sign that the trunnion pin is not original is that it has UNF threads and not the original BSF threads.
The best trunnion pins for fitting to a Minor are those from the Marina as they are surface hardened and the production finish is superior to the original Minor specification. They are near identical to the original Minor trunnion pins but have UNF threads.