AC oil filter for 918cc engine

[manlyvaleaussie]

This is Paul again in Yuma, my 918cc engine has the AC brand oil filter, does anyone know were I can find the sump to head gasket, the original fitted over the bottom of the sump but I imagine one that would fit into the groove of the base would work. O.D. of the sump is 3.470", I.D. of the base is 3.275", groove in the base is correspondingly different to allow for the gasket with an O.D. of 3.50", I.D. of 3.270". Any help would be greatly appreciated, photos attached. manlyvaleaussie

[RobThomas]

In the UK the paper filter usually comes with the new seal, even for old filters. This filter is common to many UK cars and Farm Tractors. Fordson and Dexta come to mind. I replace them with screw-on filters elements for about £25 US Dollars.



https://www.ebay.co.uk/itm/Fordson-Dext ... :rk:9:pf:0

[RobThomas]

purol3.png (775.21 KiB) Viewed 608 times

Here it is.

[RobThomas]

filterhead1.png (739.4 KiB) Viewed 599 times

purol1.png (1013.88 KiB) Viewed 599 times

2 different types originally fitted, AC and Purolator. New one is a bit smaller and takes a filter with pressure relief built in and needs an anti-drain valve, ideally.

[RobThomas]

Halfords Oil Filter HOF250 Extra Info
79MM Width
72MM Outer Seal Diameter
62.5MM Inner Seal Diameter