Carboot Bargain

Discuss anything Morris Minor related.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
alawrence10360
Minor Fan
Posts: 403
Joined: Thu Jan 31, 2019 5:54 pm
MMOC Member: Yes

Carboot Bargain

Post by alawrence10360 »

Took me 10 minutes to seperate the metric tools from an old wooden crate
the young bloke couldn't believe his luck when I wanted the "other stuff"
We agreed on a tenner....
Attachments
20190217_115237.jpg
20190217_115237.jpg (4.18 MiB) Viewed 2856 times
Sleeper
Minor Legend
Posts: 1045
Joined: Tue Nov 08, 2016 3:18 pm
Location: Manchester ( Damp and Miserable ) and that's just the wife...
MMOC Member: Yes

Re: Carboot Bargain

Post by Sleeper »

49 imperial spanners for £10 , you've been done mate , they would have only been £5 round here..

John :wink:
Up-North
philthehill
Minor Maniac
Posts: 10767
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Carboot Bargain

Post by philthehill »

Some good Britool stuff in there - well done.

You would be very lucky if you got all that for £30 here in Hampshire.

Phil

callyspoy
Minor Legend
Posts: 1110
Joined: Sun Jun 24, 2007 10:00 pm
Location: Sunny Portsmouth
MMOC Member: No

Re: Carboot Bargain

Post by callyspoy »

Phil, i didn't realise you were in Hampshire! I could've badgered you in person for your knowledge!
philthehill
Minor Maniac
Posts: 10767
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Carboot Bargain

Post by philthehill »

Hampshire is a big county but I am north of Romsey in the Test Valley.

callyspoy
Minor Legend
Posts: 1110
Joined: Sun Jun 24, 2007 10:00 pm
Location: Sunny Portsmouth
MMOC Member: No

Re: Carboot Bargain

Post by callyspoy »

Ah, basically neighbours (ish!), I am in Portsmouth.
irmscher
Minor Legend
Posts: 3773
Joined: Wed Jul 14, 2010 10:53 am
Location: South Manchester
MMOC Member: Yes

Re: Carboot Bargain

Post by irmscher »

I can feel a coffee morning going on :lol: :lol:
olderisbetter
Minor Addict
Posts: 554
Joined: Sun Apr 19, 2015 6:07 pm
MMOC Member: No

Re: Carboot Bargain

Post by olderisbetter »

I picked up the tools below from Gumtree with another box of assorted spanners and car tools for £30, The last time we went to the local car boot my mate came back with loads of old britool as he has started collecting them as a hobby.
Image
Image
Image

alawrence10360
Minor Fan
Posts: 403
Joined: Thu Jan 31, 2019 5:54 pm
MMOC Member: Yes

Re: Carboot Bargain

Post by alawrence10360 »

Give your mate my number if ever he gets bored of his new hobby
philthehill
Minor Maniac
Posts: 10767
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Carboot Bargain

Post by philthehill »

The Britool 42 series ring spanners as seen in the box above have a lovely feel when handled and are really up to hard and long term use.

The Britool 6J series open ended spanners are my preference, again lovely to handle.

It is still possible to obtain original NOS Britool spanners from the likes of 'e' bay but it does require patience to get what you want.

The hexagon drive socket set shown above is good but not so adaptable as the later 1/2" square drive though adapters are available to convert the hexagon to 1/2" square drive so that the likes of the 1/2" drive stud extractors, torque wrench etc can be used.

Britool 12 point sockets from the EBM series are to me the bees knees complimented by Britool sockets procured for specific tasks.

Whilst I do try to obtain original Britool spanners and sockets it is not always possible to find what I want so have to buy what I can obtain but always of a good quality chrome vanadium.

I still have some of the Britool spanners I purchased during my apprenticeship in the Morris/BMC Garage over 50 years ago and they are still in good condition.

Phil

les
Minor Maniac
Posts: 8737
Joined: Tue Feb 12, 2002 12:00 am
Location: kent
MMOC Member: Yes

Re: Carboot Bargain

Post by les »

Can’t go far wrong with Britool tools, almost as nice as Stahlwille!

philthehill
Minor Maniac
Posts: 10767
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Carboot Bargain

Post by philthehill »

Les
I will stick with the Britool but I do have some Stahlwillie Whitworth and A/F open ended spanners. The reason for retaining the Stahlwillie spanners is that they are quite thin and will fit into spaces that the Britool spanners will not.
Phil

les
Minor Maniac
Posts: 8737
Joined: Tue Feb 12, 2002 12:00 am
Location: kent
MMOC Member: Yes

Re: Carboot Bargain

Post by les »

Both are quality tools. I did buy a complete 200 piece tool set last year from Halfords, their advance range. Not sure how they will compare but I’m pleased with them.

alawrence10360
Minor Fan
Posts: 403
Joined: Thu Jan 31, 2019 5:54 pm
MMOC Member: Yes

Re: Carboot Bargain

Post by alawrence10360 »

Im all for King Dick matron..
philthehill
Minor Maniac
Posts: 10767
Joined: Thu Jul 19, 2012 12:05 pm
Location: Hampshire
MMOC Member: Yes

Re: Carboot Bargain

Post by philthehill »

Whilst the conversation is about tools, their quality and longevity - I have recently purchased this vintage valve re-facing lathe.

I suspect it was made a long time ago but still does the job.

Whilst not as good as a Black and Decker powered tool with the two revolving stones it certainly cleans and trues the valve seating face sufficiently to reduce the lapping in process.

The drive handle is normally fitted onto the tail part of the valve stem but that could damage the valve stem so adapted a new chuck to suit.

The cutting blade is adjustable for both size and angle so a wide range of valves can be re-faced.

For scale - the valve being re-faced is a 1275cc Morris Marina/Ital inlet valve.
Attachments
valve lathe 2.JPG
valve lathe 2.JPG (1.74 MiB) Viewed 2466 times

TDV102
Minor Addict
Posts: 641
Joined: Fri Oct 16, 2015 5:16 pm
Location: North Yorkshire
MMOC Member: No

Re: Carboot Bargain

Post by TDV102 »

I have a Kamasa 1/2" drive socket set from the 1970s. Only one socket ever failed and that was because the socket handle had a 4 foot pipe on it (stupid tyre fitter had used a windy gun). It was the best tenner I ever spent. Old Kamasa are very underrated, newer ones are rubbish.
Good home offered for custom splittie
Post Reply