Rotisserie jig

You can use this area to advertise parts.
Biggles1957
Minor Fan
Posts: 231
Joined: Wed Oct 13, 2010 7:24 pm
MMOC Member: No

Rotisserie jig

Postby Biggles1957 » Thu Jul 09, 2020 8:50 am

I have a rotisserie type roll-over jig for sale. Only used once but never painted so needs a tickle with a wire brush and some paint if you want to. Looking for £75 or thereabouts.

pertwoodpie
Minor Friendly
Posts: 51
Joined: Tue May 15, 2007 3:15 pm
MMOC Member: No

Re: Rotisserie jig

Postby pertwoodpie » Thu Jul 09, 2020 10:57 pm

Hello
where are you based may well be interested
thanks
marcus

Biggles1957
Minor Fan
Posts: 231
Joined: Wed Oct 13, 2010 7:24 pm
MMOC Member: No

Re: Rotisserie jig

Postby Biggles1957 » Fri Jul 10, 2020 9:29 am

Hi Marcus. About ten mins from M1 J21 in Leicestershire - outside the lockdown zone!!

pertwoodpie
Minor Friendly
Posts: 51
Joined: Tue May 15, 2007 3:15 pm
MMOC Member: No

Re: Rotisserie jig

Postby pertwoodpie » Mon Jul 13, 2020 9:57 am

Hello thanks for this, sadly too far for me as down in the deep south !

Graham c
Newbie
Posts: 7
Joined: Fri Jul 10, 2020 12:01 pm
MMOC Member: Yes

Re: Rotisserie jig

Postby Graham c » Sun Jul 19, 2020 3:31 pm

Do you still have this for sale and is it suitable for a 4 door Morris 1000, I’m near derby

Graham c
Newbie
Posts: 7
Joined: Fri Jul 10, 2020 12:01 pm
MMOC Member: Yes

Re: Rotisserie jig

Postby Graham c » Sun Jul 19, 2020 3:31 pm

Do you still have this for sale and is it suitable for a 4 door Morris 1000, I’m near derby

Graham c
Newbie
Posts: 7
Joined: Fri Jul 10, 2020 12:01 pm
MMOC Member: Yes

Re: Rotisserie jig

Postby Graham c » Sun Jul 19, 2020 3:31 pm

Do you still have this for sale and is it suitable for a 4 door Morris 1000, I’m near derby

Biggles1957
Minor Fan
Posts: 231
Joined: Wed Oct 13, 2010 7:24 pm
MMOC Member: No

Re: Rotisserie jig

Postby Biggles1957 » Mon Jul 20, 2020 2:58 pm

Yes I do Graham - I think (if it worked!) I messaged you early this morning?

Regards,
Bob

Graham c
Newbie
Posts: 7
Joined: Fri Jul 10, 2020 12:01 pm
MMOC Member: Yes

Re: Rotisserie jig

Postby Graham c » Tue Jul 21, 2020 2:36 pm

I have not seen a message bob, I’m new to the club and trying to get my head around how the site works, if it is ok for a minor 4 door and will fit in a focus estate I will definitely have it off you please

Graham c
Newbie
Posts: 7
Joined: Fri Jul 10, 2020 12:01 pm
MMOC Member: Yes

Re: Rotisserie jig

Postby Graham c » Tue Jul 21, 2020 2:36 pm

I have not seen a message bob, I’m new to the club and trying to get my head around how the site works, if it is ok for a minor 4 door and will fit in a focus estate I will definitely have it off you please

geoberni
Minor Legend
Posts: 1579
Joined: Fri Aug 04, 2017 11:19 am
MMOC Member: Yes

Re: Rotisserie jig

Postby geoberni » Tue Jul 21, 2020 3:07 pm

Graham c wrote:
Tue Jul 21, 2020 2:36 pm
I have not seen a message bob, I’m new to the club and trying to get my head around how the site works, if it is ok for a minor 4 door and will fit in a focus estate I will definitely have it off you please
Hi
You will only get a 'Private Message' if you pick it up. If you're on a PC the notification appears on the top Right Corner of the screen. If you're on a phone it's probably top centre.
It is possible to set preference in your profile to receive email notifications of awaiting messages.
Basil the 1955 series II

Image

Graham c
Newbie
Posts: 7
Joined: Fri Jul 10, 2020 12:01 pm
MMOC Member: Yes

Re: Rotisserie jig

Postby Graham c » Tue Jul 21, 2020 6:07 pm

Thanks, I found the message and have replied I think.

Carty
Minor Friendly
Posts: 24
Joined: Mon Aug 21, 2017 11:44 pm
MMOC Member: Yes

Re: Rotisserie jig

Postby Carty » Sun Jul 26, 2020 5:35 pm

Message sent

Carty
Minor Friendly
Posts: 24
Joined: Mon Aug 21, 2017 11:44 pm
MMOC Member: Yes

Re: Rotisserie jig

Postby Carty » Sun Jul 26, 2020 5:35 pm

Message sent

Biggles1957
Minor Fan
Posts: 231
Joined: Wed Oct 13, 2010 7:24 pm
MMOC Member: No

Re: Rotisserie jig

Postby Biggles1957 » Fri Jul 31, 2020 9:45 am

SOLD. Thanks :D


Who is online

Users browsing this forum: No registered users and 0 guests