Series MM Twin H1 Carbs

You can use this area to advertise parts.
Potts
Newbie
Posts: 4
Joined: Sat Sep 07, 2019 9:33 pm
MMOC Member: No

Series MM Twin H1 Carbs

Postby Potts » Sat Oct 03, 2020 6:06 pm

I've recently taken on my recently passed uncle's Mk1 Midget (948cc). Among his bundle of parts is a pair of fully serviced SU H1 carb's (receipt shows the service cost him £214). The Mk1 Midget has HS2s, so I've been trying to figure-out why he had these ready for fitting. I've learned that the 948cc MK1 Sprite had twin H1s, so it's possible that he simply thought they'd be fine on his Mk1 Midget. The chap now restoring the car's original HS2s said that these H1s would not have been suitable for the Sprite/Midget, as the float chambers are horizontal (0 deg - Spridgets should be 20 deg) and they also have an unusual/custom inlet manifold. After a few days contacting his fellow carb restoration pals, they have collectively suggested that these H1s were probably made for the Series MM sidevalve engine. Having since looked at a few MM sidevalve engines with twin H1s, some have them mounted slightly different to my setup, though I've also seen examples where they're mounted the same. Could they even be split to make two separate Series MM H1 single carbs?

I want to sell the H1s and it would be easy just to list them on eBay. However, I'd like them to go to the appropriate ownership/appropriate vehicle, as they seem to be quite a rare item.

I'm looking to to recover my uncle's cost of servicing (£214), plus something for the carbs.

£400 (Happy to discuss)
Attachments
IMG_6498.jpg
IMG_6498.jpg (522.12 KiB) Viewed 372 times
IMG_6497.jpg
IMG_6497.jpg (509.27 KiB) Viewed 372 times
IMG_6496.jpg
IMG_6496.jpg (490.1 KiB) Viewed 372 times
IMG_6495.jpg
IMG_6495.jpg (537.13 KiB) Viewed 372 times
IMG_6494.jpg
IMG_6494.jpg (596.47 KiB) Viewed 372 times

alanworland
Minor Legend
Posts: 1349
Joined: Tue Jan 30, 2007 10:09 pm
MMOC Member: No

Re: Series MM Twin H1 Carbs

Postby alanworland » Sun Oct 04, 2020 11:25 am

Quite a find!
I bought a pair of (I was told) Sprite H1's years ago for my sidevalve and they had the angled floatchambers consequently I made up a pair of independent manifolds to support them at the correct angle.
I think I had a bit of a post going at the time, a few years ago.

Alan
Image

Potts
Newbie
Posts: 4
Joined: Sat Sep 07, 2019 9:33 pm
MMOC Member: No

Re: Series MM Twin H1 Carbs

Postby Potts » Sun Oct 04, 2020 6:03 pm

Thank you Alan. That's very impressive to have manufactured a manifold to correct the Sprite float chamber angle!

I guess they're quite niche, so may take a while to sell, though Happy to negotiate when anyone's interested.

Best wishes,
Richard

sparesman
Minor Fan
Posts: 491
Joined: Tue Dec 25, 2012 7:40 pm
MMOC Member: Yes

Re: Series MM Twin H1 Carbs

Postby sparesman » Wed Oct 07, 2020 8:58 pm

I dont think they are MM as both end flanges of the body ,where the filter attaches and where as individual carbs they fit to the manifold , are different shapes to the MM carb. They look more like Series 11 carb flanges. Also the brass choke levers are wrong. They were possibly made up from a SU carb parts bin for a specific purpose.
If you add a photo of the manifold taken from the engine side with dimensions between mounting holes and of the bore it might help identify it.
1934 Morris 10/4 in Dark Green / Black - BGO517
1953 S11 Traveller in Birch Grey - oldest survivor ? Export model now reg PPO924
1953 S11 Traveller in Black - 3rd oldest PPX344
1954 S11 2dr Saloon in Birch Grey - GVG270

RobThomas
Minor Legend
Posts: 2676
Joined: Thu May 11, 2006 10:34 am
MMOC Member: Yes

Re: Series MM Twin H1 Carbs

Postby RobThomas » Sun Oct 25, 2020 4:24 pm

Cardiff, UK


Who is online

Users browsing this forum: No registered users and 0 guests