Clutch Master cylinder used with Toyota 5 speed box

[Stoneporch]

Last week I had a new clutch slave cylinder fitted thanks to information received on this forum. I now need to have a clutch master cylinder fitted. Unfortunately I have no idea which unit was fitted for the conversion (done by the Morris Minor Centre). The slave cylinder was the standard A40/ midget unit and the gearbox is a Toyota 5 speed. Can anyone suggest which master cylinder I need to order. Thanks. Stoneporch.

[philthehill]

I believe that the Toyota 5 speed conversion done by the Morris Minor Centre for use in a Morris Minor used the clutch release mechanical linkage.
The hydraulic clutch release system was used on the MG Midget/Sprite conversion.
For example - you can use a clutch master cylinder fitted to the cross member. See photo below & which is operated by a mildly modified Minor clutch pedal.

Hydraulic clutch 5.JPG (824.31 KiB) Viewed 75 times

Hydraulic clutch 1.JPG (831.58 KiB) Viewed 73 times

The fluid reservoir is remotely mounted under the bonnet.
ESM supply a hydraulic conversion kit which is similar to that fitted to my Minor.
https://www.morrisminorspares.com/clutc ... ly-p829580