Page 1 of 1
Dimensions
Posted: Wed Apr 21, 2010 9:30 am
by 8009STEVE
Anybody know the overall lenght of a saloon, with overriders fitted? Thanks
Re: Dimensions
Posted: Wed Apr 21, 2010 11:31 am
by ASL642
Just been out and measured the Convertible. 148.5" to include overiders.
Re: Dimensions
Posted: Wed Apr 21, 2010 4:12 pm
by LouiseM
The Haynes manual says 149.5''
Re: Dimensions
Posted: Wed Apr 21, 2010 6:01 pm
by ASL642
Perhaps ours are longer
I measured all 3 saloons on the drive (all have overiders)
Re: Dimensions
Posted: Wed Apr 21, 2010 6:05 pm
by PSL184
Of course - the Haynes manual is
always correct
The official handbook states 12' 4" for a saloon (148")
Re: Dimensions
Posted: Wed Apr 21, 2010 6:33 pm
by LouiseM
I measured all 3 saloons on the drive
I bet your neighbours are getting a bit concerned
I suspect that Steve just wants to check how much he's stretched one
Re: Dimensions
Posted: Wed Apr 21, 2010 7:08 pm
by MColes
I bet your neighbours are getting a bit concerned
"mummy the crazy lady's out messing with her cars again!"
Re: Dimensions
Posted: Wed Apr 21, 2010 7:13 pm
by PSL184
LouiseM wrote:
I suspect that Steve just wants to check how much he's stretched one
A
standard Traveller is 1" longer than a saloon....
Re: Dimensions
Posted: Thu Apr 22, 2010 9:17 am
by 8009STEVE
No I am not stretching a saloon. Had thought about it though.
Just thinking about another "little" project. Thanks for all the replies, Steve.