Recreating Beatrice
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Re: Recreating Beatrice
There are some instructions for removing the lever here, with pictures: http://www.mmoc.org.uk/viewtopic.php?f= ... door+lever
Eric - 1971 Traveller
-
- Minor Fan
- Posts: 126
- Joined: Wed Jun 20, 2012 5:18 am
- Location: Spokane, WA USA
- MMOC Member: No
Re: Recreating Beatrice
Thanks Splitscreen and Louise. It's wonderful how helpful people are.
I got the handle out but I ended up breaking the little lock lever. I moved it and torqued it so many times that it snapped. I have to admit though that even when I had it out and in my hand I still barely understand how I was supposed to get it out. The latch still works fine but it will no longer lock from inside the cabin.
Looking at the latch and other parts like the bonnet release mechanism has really showed me how the Morris differs from other British cars of the era. The only other car I completely restored is a 1971 Triumph TR6. The Triumph is much simpler and seemed of lesser quality. I find this surprising since the Morris was less expensive. Maybe this is why Morris was making so little profit near the end.
I removed the front clip yesterday and the Morris has many more parts and more fiddly bits. For example the bonnet release in the Triumph is just a cable and one latch. The Morris has a bunch of springs, pins, and connecting pieces.
George
I got the handle out but I ended up breaking the little lock lever. I moved it and torqued it so many times that it snapped. I have to admit though that even when I had it out and in my hand I still barely understand how I was supposed to get it out. The latch still works fine but it will no longer lock from inside the cabin.
Looking at the latch and other parts like the bonnet release mechanism has really showed me how the Morris differs from other British cars of the era. The only other car I completely restored is a 1971 Triumph TR6. The Triumph is much simpler and seemed of lesser quality. I find this surprising since the Morris was less expensive. Maybe this is why Morris was making so little profit near the end.
I removed the front clip yesterday and the Morris has many more parts and more fiddly bits. For example the bonnet release in the Triumph is just a cable and one latch. The Morris has a bunch of springs, pins, and connecting pieces.
George
-
- Minor Fan
- Posts: 126
- Joined: Wed Jun 20, 2012 5:18 am
- Location: Spokane, WA USA
- MMOC Member: No
Re: Recreating Beatrice
Everything is out now and it's ready for media/sand blasting. The only rust so far is a few pinholes in the boot floor.[frame][/frame][frame][/frame][frame][/frame][frame][/frame]
[frame][/frame]
George
[frame][/frame]
George
-
- Minor Fan
- Posts: 126
- Joined: Wed Jun 20, 2012 5:18 am
- Location: Spokane, WA USA
- MMOC Member: No
Re: Recreating Beatrice
I've run into a problem trying to clean up the blower casing. It was very brittle and I cracked it taking it apart. I checked ESM and BM but no luck. I could patch it but it is so brittle that I would like to replace it with something new. Does anyone know an alternative? Are there any aftermaket blowers? It's a shame because the motor works fine and is very quiet.
Thanks,
George[frame][/frame]
Thanks,
George[frame][/frame]
-
- Minor Addict
- Posts: 550
- Joined: Wed Jul 28, 2010 9:39 am
- Location: Netherlands, Drenthe
- MMOC Member: No
Re: Recreating Beatrice
The best option is, find a spare
But in my place I first should remake it from stainless steel, TIG welded, because I am working in a stainless steel company ;)
repair the old one with a piece of stainless steel is also an option.
But in my place I first should remake it from stainless steel, TIG welded, because I am working in a stainless steel company ;)
repair the old one with a piece of stainless steel is also an option.
MM '51 LHD sidevalve
-
- Minor Legend
- Posts: 1565
- Joined: Fri Aug 05, 2011 9:53 pm
- Location: Leeds, West Yorkshire
- MMOC Member: No
Re: Recreating Beatrice
As a semi permanant repair and if you have the bit thats missing I would use an epoxy resin to glue it back together. Also you could take a piece of black plastic, file some off it to make some black plastic filler to mix with the epoxy and help try to disguise the join.
Richard
Opinions are like people,everyone can be different.
Opinions are like people,everyone can be different.
-
- Minor Legend
- Posts: 3635
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Re: Recreating Beatrice
Hi,I got the handle out but I ended up breaking the little lock lever. I moved it and torqued it so many times that it snapped. I have to admit though that even when I had it out and in my hand I still barely understand how I was supposed to get it out. The latch still works fine but it will no longer lock from inside the cabin.
Those little catches are available (I would think all the main suppliers will do them), some links below, if you are interested in replacing them. Personally I like the option of being able to lock the car from the inside.
Best wishes,
Mike.
http://www.morrisminorspares.net/shop_item.php?ID=1821
http://www.morrisminorspares.net/shop_item.php?ID=1822
http://morrisminorspares.co.uk/shop/pro ... 19fde79ee5
http://morrisminorspares.co.uk/shop/pro ... 19fde79ee5
Last edited by jagnut66 on Sun May 05, 2013 5:55 pm, edited 1 time in total.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
-
- Minor Fan
- Posts: 126
- Joined: Wed Jun 20, 2012 5:18 am
- Location: Spokane, WA USA
- MMOC Member: No
Re: Recreating Beatrice
Thanks guys.
George
George
-
- Minor Legend
- Posts: 1140
- Joined: Thu Jan 19, 2012 4:55 pm
- Location: Le Tronquay, nr Bayeux, en France - Pop in for a cuppa!
- MMOC Member: No
Re: Recreating Beatrice
I think the heaters themselves are the same as those used in early Land Rovers, so keep an eye out for one to use as a donor.
-
- Minor Fan
- Posts: 126
- Joined: Wed Jun 20, 2012 5:18 am
- Location: Spokane, WA USA
- MMOC Member: No
Re: Recreating Beatrice
I found this marine blower for US$90. https://www.boatpartsforless.com/shop/j ... r-105-cfm/
It is rated at 105 ft3/minute. I don't know what the stock one blows but this little one feels stronger. It has the same 3" entrance and exit. Jabsco also makes a larger 150 ft3/minute model.[frame][/frame][frame][/frame][frame][/frame]
I also took the car to the sand/media blaster.
George[frame][/frame]
It is rated at 105 ft3/minute. I don't know what the stock one blows but this little one feels stronger. It has the same 3" entrance and exit. Jabsco also makes a larger 150 ft3/minute model.[frame][/frame][frame][/frame][frame][/frame]
I also took the car to the sand/media blaster.
George[frame][/frame]
-
- Minor Fan
- Posts: 126
- Joined: Wed Jun 20, 2012 5:18 am
- Location: Spokane, WA USA
- MMOC Member: No
Re: Recreating Beatrice
Back from the blaster and off to the painter.
George[frame][/frame]
George[frame][/frame]
-
- Minor Fan
- Posts: 211
- Joined: Wed Dec 19, 2012 7:09 pm
- Location: Near Ellon in rural Aberdeenshire
- MMOC Member: No
Re: Recreating Beatrice
Wouldn't it be lovely to collect your restoration project from the blaster and take it direct to the painter without the long ( and expensive if you're not doing it yourself!) stop off in between for the welding!!
-
- Minor Fan
- Posts: 126
- Joined: Wed Jun 20, 2012 5:18 am
- Location: Spokane, WA USA
- MMOC Member: No
Re: Recreating Beatrice
I got some new van wheels powder coated and mounted with some 155/80 Toyo 310 tires. I also powder coated my old spare and mounted a 145 tire.
George[frame][/frame][frame][/frame]
George[frame][/frame][frame][/frame]
-
- Minor Fan
- Posts: 126
- Joined: Wed Jun 20, 2012 5:18 am
- Location: Spokane, WA USA
- MMOC Member: No
Re: Recreating Beatrice
Check out the Frilford Grey! Beatrice was Clarendon Grey but I like this 1959 colour much more. It's darker and more charcoal than it appears in these pictures. I also soundproofed under the headliner.[frame][/frame][frame][/frame][frame][/frame]
-
- Minor Fan
- Posts: 126
- Joined: Wed Jun 20, 2012 5:18 am
- Location: Spokane, WA USA
- MMOC Member: No
Re: Recreating Beatrice
OK, I got a little carried away with the Dynamat sound proofing.
George
[frame][/frame][frame][/frame]
George
[frame][/frame][frame][/frame]
-
- Minor Legend
- Posts: 1312
- Joined: Thu Jan 28, 2010 4:14 am
- Location: Fulton, Missouri, United States
- MMOC Member: No
Re: Recreating Beatrice
Jeez George! That stuff's expensive!
The way to a man's heart may be making food, but the way to my heart is buying me car parts!
Come read about my Minor at An American Moggie.
Come read about my Minor at An American Moggie.
-
- Minor Fan
- Posts: 126
- Joined: Wed Jun 20, 2012 5:18 am
- Location: Spokane, WA USA
- MMOC Member: No
Re: Recreating Beatrice
I know, I know... I justify it by thinking that the quieter the car is the more I'll drive it.
George
George
Re: Recreating Beatrice
I've always wanted to do that, add some laminated glass and she'll feel like a vault I expect.
Gabriel
-
- Minor Addict
- Posts: 550
- Joined: Wed Jul 28, 2010 9:39 am
- Location: Netherlands, Drenthe
- MMOC Member: No
Re: Recreating Beatrice
I know a quiet car sometimes has other problems, when I drive slow with my Prius om a parking area, some people does not hear me....
Old cars need to have old noises ;)
My motorbike is also not quiet, but I still like to drive him
Old cars need to have old noises ;)
My motorbike is also not quiet, but I still like to drive him
MM '51 LHD sidevalve