Coil
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Re: Coil
I would never doubt the coil Roy although mine "appears" to be open circuit and I'm not getting any power to the dizzy
[sig]8426[/sig]
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Re: Coil
Oh dear....it does sometimes happen. You know well that my exhortations are there simply to make folks consider other possibilities before blinding renewing the coil every time the engine splutters.
Re: Coil
Roy's 3.2 Ohms is for the primary circuit ,read from the 2 low tension terminals.( typical 3 / 3.5 range for a non ballasted coil ).
The Secondary circuit reading Black lead to the ( HT KIng lead ) tower connection and the Red lead to the + Low Tension connection... the reading should be circa 5 Ohms.
Just writing for others on the Forum who are not familiar. Acknowledging that the information re the exact problem has moved on !
Bob
The Secondary circuit reading Black lead to the ( HT KIng lead ) tower connection and the Red lead to the + Low Tension connection... the reading should be circa 5 Ohms.
Just writing for others on the Forum who are not familiar. Acknowledging that the information re the exact problem has moved on !
Bob